Hello,
I need to updated X-Y coordinates of my cross sections in the flex table.
Though it is possible to change coordinates of individual CS, it is not possible to do it in flex table. How can I change coordinates of set of CS in one go?
Thanks & Regards
Nishadi
Hi Nishadi,
A possible solution to update multiple cross sections would be to create an excel table with the desired values and then use the model builder to import this table into your model as explained in the following article:
Export data to an Excel spreadsheet
After the correct import of the table you can use the Sync-Out function to update your X and Y components of your cross section as instructed in the following article:
Using the Sync Out function to update source files using ModelBuilder
I would also like to point you to the following WikiArticle about importing cross sections data that may take away some of your doubts about this process:
Importing cross sections data with Modelbuilder
Regards,
Luca BillisTechnical Support Engineer, OpenFlowsBentley Systems, Inc.
Answer Verified By: Nishadi
Hello Nishadi,
I would like to complement my previous answer, for your case you will actually have to use the Sync-In tool (import) to bring your data into your model and update your cross sections, the topic "Option 1" of the following article clarifies this alternative:
How to move, scale or rotate a model to the correct location?t
Thanks Luca. I was able to do that in synchronizing option in model builder.
Regards