Flooding in the cross-section node

I ran the model in civilstorm for the rainfall scenario which has pump. The property of the cross section shows there is flooding in the node. I Couldn't identify the same in the profile. Please provide the support to resolve this issue.

In the below table, it shows Maximum HGL as 14.25 at 12.55 hours.

The below section snip does shows the hydraulic grade line till 11.80' at 12.55 hours and its not reaching the elevation 14.25 but there is small horizontal line (HGL) at 14.25 elevation.

I would like to know why HGL stops at 11.80, Why HGL is not as per property table. I even doubled the pump size, the node still shows flooding..Its not receding also.

Parents Reply Children
No Data