This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Ponds in series?

I'm new to PondPack V8i but was fairly familiar with PondPack 10.

Here's what I need to do:  I'm modeling a large basin draining to a proposed culvert that I'm modeling as a pond to see how high the headwater will reach.  I have a small basin (developed site) draining through a pond that discharges about 1,500 upstream of the culvert that I need to direct into the culvert "pond".

I'm routing the small pond's outfall to a junction and then through a conduit (reach) but I can't figure out how to connect the conduit to the downstream culvert pond.

Sorry if this topic has come up before, I did attempt to search for it before posting.

Thanks,
Allen