This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Tank and end connections

Hi,
How to draw a pipe layout . The case is "a Pump pumps in water from a underground tank to a tank on a building". 
Now  as in water cad we insert a tank on the building and connect it to a pump and inturn connects to the U/G tank. BUT we have to provide the min, max levels in the tank properties. But the actual thing is we are just filling that tank which has a demand of 5000 litres. 
So how can we simmulate this on water cad? I hope you understand the scenario. 

Parents
  • Hi ADR,

    It's always good to share what you have tried and where you stuck. That way we know exactly where to point you at. So, please share the model you tried for above situation and let us know what did not work.

    Regarding tank, any container has some height, right? So, height 0 is it's minimum level (or elevation) and if it is 3 ft tall then it's Max level (or elevation) is 3 ft. So, I assume you tank is a container with some height so please enter it's minimum elevation as minimum elevation and max elevation as maximum elevation. You can enter initial elevation somewhere in between the max and min.

    Please don't get me wrong, we are here to help however it might be efficient if you go thru some quick start lesson from help or even consider taking a training. Depending on your company subscription with Bentley, you might get the training materials/videos for free. So, I encourage you to explore these sides as well.

    Use this link to get started. http://learn.bentley.com/

    Hope this helps



Reply
  • Hi ADR,

    It's always good to share what you have tried and where you stuck. That way we know exactly where to point you at. So, please share the model you tried for above situation and let us know what did not work.

    Regarding tank, any container has some height, right? So, height 0 is it's minimum level (or elevation) and if it is 3 ft tall then it's Max level (or elevation) is 3 ft. So, I assume you tank is a container with some height so please enter it's minimum elevation as minimum elevation and max elevation as maximum elevation. You can enter initial elevation somewhere in between the max and min.

    Please don't get me wrong, we are here to help however it might be efficient if you go thru some quick start lesson from help or even consider taking a training. Depending on your company subscription with Bentley, you might get the training materials/videos for free. So, I encourage you to explore these sides as well.

    Use this link to get started. http://learn.bentley.com/

    Hope this helps



Children