Hi everyone,
Could Watergems run an EPS simulation by using fixed flow profile instead of pressure profile as a boundary condition. The inlet flow profile will acting as (+ve-give water) intead of (-ve -using water). Because sometimes data for inlet pressure profile is not unavaible so we could used others method to run the model.
One more things, could Watergems create transfer node?
Hope somebody will explain about this matters.
Thank you.
There is a way to create Negative Demand on a node to achieve this result. Take a look at the following Wiki article for a clear description.
communities.bentley.com/.../modeling-fixed-inflow-from-a-marginal-source.aspx
Concerning your second question, I will need to ask you to please explain in more detail? What do you mean by Transfer Node?
Hi Dan,
Thank you for your answer. According to second question, transfer node is when we need to run model with their own driving head. Example, we have a network system consists two or more DMA, we need to transfer node then we could run the model with their own drining head before we continue with driven from the trunk main.
Hope this could help you to understand more.
Here is a link to a Wiki on Connecting to Existing Systems. Is this what you are referring to? If not, can you please explain the situation in a little more detail?
communities.bentley.com/.../9293.modeling-a-connection-to-an-existing-system.aspx