Is here someone know that when I using WaterGEMS or Hammer.
How to set the precision (fixed point) of pipe length or diameter in Export EPANET .inp files ? Thanks.
[PIPES]1000P(Polyline)-115 J-1 J-2 0.764530763804738 152.40000000061 130 0 1000P(Polyline)-112 J-3 J-4 1.04632918280616 152.40000000061 130 0 1000P(Polyline)-114 J-5 J-6 1.07992354358184 152.40000000061 130 0 1000P(Polyline)-113 J-7 J-8 1.22628610815877 152.40000000061 130 0 1000P(Polyline)-106 J-9 J-10 1.22702054427728 152.40000000061 130 0
I just need 3 Decimal Point.
There are some limitations while exporting or importing models from WaterGEMS or Hammer to EPANET. Display precision of the decimals can be set to 3 or as required in WaterGEMS/Hammer , through properties of the pipe or through the flex table. But when you are exporting the model to EPANET it again takes its actual value or decimals which are present there.
Please have a look at this support solution about EPANET import/export limitations.
communities.bentley.com/.../10274.what-are-the-limitations-of-importingexporting-epanet-files.aspx
Regards,
Sushma Choure
Bentley Technical Suppport
Answer Verified By: Ray Yang
Thanks, Sushma. It's appreciated.