This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Sewer network direction are wrong

Hello

I'm using sewergems select series 3 to model a sewerage network

after i have built the model and entered the load i have run the design and it went crazy and gave me wrong direction of the flow

the flow goes out of outfall not toward outfall and this is my first time to see it in sewercad 

them model is attached 

thanks

Example.rar
Parents
  • Hello Ahmed,

    I just ran your model in SewerGEMS SS3 (08.11.03.84) and all the flows went towards the outfall.  Is this the same build you are using, and do you have the latest cumulative patch applied?  Below is a screen shot of the model.

    Terry Foster
    Technical Support
    Hydraulics and Hydrology product line
    Bentley Systems, Inc.


    Answer Verified By: ahmed hassan 

Reply
  • Hello Ahmed,

    I just ran your model in SewerGEMS SS3 (08.11.03.84) and all the flows went towards the outfall.  Is this the same build you are using, and do you have the latest cumulative patch applied?  Below is a screen shot of the model.

    Terry Foster
    Technical Support
    Hydraulics and Hydrology product line
    Bentley Systems, Inc.


    Answer Verified By: ahmed hassan 

Children