• Help With setting up a VSP or VFD with 4 pumps.

    Hi, Working with SewerGEMs, GVF-Convex solver. I need your assistance in setting up a VSP or VFD with the below on and off (elevations) controls. I want to use the fixed head VSP type and use my control node as the Wetwell. probably with a target HGL…
  • Pump Failure Simulations

    I am using sewergems V8i and trying to simulate failure at lift stations and the cause effect of the failure. I know I would have to use the control sets in assigning when the pump should go off. But how do I display the max HGL in manholes say 1 mins…
  • Exporting SewerGems Pipes & Manholes with Annotations to dxf file

    While exporting my SewerGems V8i model to .dxf file, the network with Manohle annotations are exported. Also, the pipes with colour coding are exported. However, pipe annotations are not exported. I require the pipe annotations to be shown on the dxf…
  • RE: Modeling Gutters in SewerGEMS: Flow, Depth, and Spread

    Hi rdueck, Regarding questions #1 and #2, I'm checking into a few things first so I can give you a complete and accurate answer. For #3, if the subsurface piping overflows out of the catchbasin, that overflow is accounted for in the downstream gutter…