• SewerCAD/GEMS: Set Manhole Elevations to be Equal to Invert Out

    SewerCAD/GEMS: I currently have all my manhole invert elevations set to zero, but I do have invert elevations for all the conduits. Is it possible to set all the manhole invert elevations to be equal to the invert elevations of the outgoing pipes without…
  • All elements are not displayed after running model builder

    Hi, I recently found a problem while using the model builder. I have already done every steps required in model builder and then I clicked finish and succeeded, but all elements are not displayed eventhough when I open the flex tables, all the data…
  • Difference between Head and Pressure

    For reference, have looked at previous answers including the following: https://communities.bentley.com/products/hydraulics___hydrology/f/haestad-hydraulics-and-hydrology-forum/54400/pressure-and-pressure-head-what-are-the-differences https://communities…
  • Water Age (Maximum) - Export to Shapefile

    Hello, It doesn't seem like there is a way to export the water age (maximum) results into a shapefile, since that is not a flextable column, which makes sense since the maximums are not necessarily associated with the same timestep. What is the recommended…
  • Demand met?

    Hi. I'm new to the software so please bear with me haha. Okay now in the demand centre I have given my demands. And when I compute the results I'm having a hard time understanding if my demands are being met or not for the the junctions. Do we check…
  • Custom Report Using Customized FlexTables

    I am utilizing Custom Reports to build a report using 5 different FlexTables for 8 different scenarios. I do this all the time so this will save me lots of time and finger clicks. However, although I have customized the flextables to only show active…
  • Shared Flextables on a network

    I have created custom shared flextables that I need available to a network drive. Is there any sort of global setting to allow users to access these tables without storing them in the location: C:\users\(user name)\ appdata\local\Bentley\stormcad\8…
  • RE: Adding a field in 2-Row FlexTable (StormCAD)?

    Hello Nigel, Below is an excerpt from the StormCAD documentation regarding the currently available fields that can be displayed in two rows, in a 2-row Flextable. The other fields that you can add are Conduits fields. Perhaps you could provide a little…
  • RE: Reports

    You can also use a 2-Row Flextable to display conduit and adjacent node information. Example: For the pressure pipe and pressure junction information, you'll need to set up separate reports using the Pressure Pipe and pressure junction flextables…
  • Re: StormCAD V8, Saving FlexTable

    Hi Mike, Giving users the ability to customize and save the FlexTables is certainly the intent, and it should work fine (it is working for me on my machine). Someone from Tech Support will probably jump in and give you some tips (you can…
  • 70% Analysis in SewerGEMS

    Hi All! I am looking to analyse a sewer model to see if flows are exceeding 70% in certain pipes. I think I need to edit the "Design Percent Full (%)" in a flex table or the "local pipe constraints" drop down, however, even when I ensure my model…
  • Re: SewerGEMS v8i Printing Flextables? Data reporting and presentation?

    Hello Glenn, You can certainly print directly from the software. The plan view and all reports should have a "report" button. For example let's take the conduit flextable: This button will open the report window, which you can print…
  • Re: Network with many reservoirs

    Hi Blossom: Since you say you know the demands that each reservoir must cover, you should enter that data into the software. Demands are entered on Junctions, either in their Property Grid, in the Junction Flex Table, or in the Demand Control…
  • Re: How can I relabel junctions according to their X or Y in XM version?

    Hello Zartosht, Currently, the order used by the relabel feature is based on the element IDs. Please try the following workaround: 1) Open the flextable for the nodal element type in question 2) If you have an active filter or sort…
  • Re: StormCAD FlexTable Report

    Hello, It looks like the flextable header formatting could use some improvement, but please try this as a workaround in the meantime: 1) Close the flextable and go to Report > Report Options 2) In the "Header" tab, the default variable…
  • Re: SewerCAD Query function

    Candice, I assume you're using SewerCAD V8, is that correct? To do this, first double click your query (to select the element sin the drawing pane), then open the Flextable manager from View > Flextables. Right click on the flextable you…
  • FlexTable - how to show only active topology

    I am trying to print the flextables for pipes, junctions, etc and I only want to show the active topology. I am using a filter to remove the inactive elements; is there another way to do it? Thanks!
  • Syntax error Global edit

    Dear, I can not global edit diameters of pipes, I get syntax error. Someone can help me? I have installed Watercad v8i select series 4
  • Using Common FlexTables for Various Users and Projects

    In PondPack, how do you share Flextables among multiple users? I know there that xml tables can be copied from other users, but which xml files hold custom information? i see that the following xml files updated after I updated my shared flextables…
  • Re: Updating/Organizing Flextables in StormCAD

    Hello Enakos, The flextable should automatically update when an element is deleted. In order to troubleshoot why this isn't happening for you, we'll need a bit more information. If you're using StormCAD V8 XM or V8i, a quick thing to try would be to…
  • PondPack Connected Impervious Area

    General question about how to model drainage areas in pondpack... I have a drainage area which includes both impervious and pervious area. The impervious area is directly connected to the drainage system. I enter the following values in the "CN Area…
  • Re: Hammer - Arranging Pipe FlexTable Order

    If you want complete control over order, you could add a numeric User Data Extension field, add that column to your FlexTable, enter a value to specify the order for each row, then sort by that field. Regards, Rob.