• Re: modelling with 2 fire events

    Grgulla, Briefly, you mentioned it was a requirement to model 2 fire events - understood that it is a requirement - a bit conservative but I wanted to mention a few other points to consider when modeling 2 fires simultaneously- This will obviously drive…
  • Re: Darwin Calibrator

    Didi, can you help out with some clarification on your question, are you working out a workshop and trying to get the results that are part of the workshop? or Calibrating using Darwin Calibrator for an actual system? If you are Calibrating for a real…
  • SewerCAD/GEMS and SCADA Connect

    Hello everybody, Does anyone knows if SewerCAD/GEMS supports connection with data of a SCADA system through SCADA Connect? Thanks Bill Prassas
  • WaterCAD age calculation fails

    I have run into a recent problem. I've been trying to do a age calculation on our water system and for some reason the largest duration I can calculate is 128 hrs. If I change it to 129 hrs the calculation fails and I get an error: Calculation Engine…
  • Reporting the Physical Properties of a Junction

    Hi All, i'm writing a C# code using WaterObjects.NET to report for every junction its Physical properties : (elevator, areas, emitter coefficent). Which classes/feaures may help me? For example from the programming manual i found that scenarios…