• Pipe not showing in Profile

    I am using StormCAD Connect Edition Update 3 version 10.03.03.44 I have a transition node with three pipes conveying water into it and one pipe conveying water away from it. For some reason all the pipes except CO-6 display in my profile. In the image…
  • evento transitorio spegnimento pompa velocità variabile

    buonasera, ho riscontrato due errori in questa simulazione: 1) problema cavitazione 2) analizzando i risultati dell'analisi ho notato che le portate (flow) delle tubazioni a valle della pompa spenta non tendono mai a 0 ho pensato: per risolvere…
  • ID/Label in Profile

    Hi, Is it possible that we have Only Label in Profile view(not Engineering profile view) so that there will not be any text clash. Please find the attachment below. Thanks
  • Interferences in profiles Sewergems

    hi all, can be given in the profiles the interference between pipes can give me a hint please thanks..
  • Creating Profiles from SewerGems Shapefile in Civil 3d

    Dear Bentley Team, I want to create profiles from SewerGems shape files in Civl 3d. When I import shapefiles in civil 3d through map import command, the conduit properties shoes proper values of Elevation start and Elevation End but z elevation shows…
  • Showing Profiles and Graphs in Civil Storm

    Hi, Is there away to make the time step jumps directly to the time of max HGL on a profile view. I can see the red tick marks of the max HGL but I want the simulation to jump and pause at that time? thanks
  • RE: Profile Ground Option (SewerCad V8i)

    Original Post: http://communities.bentley.com/products/hydraulics___hydrology/f/5925/t/67715.aspx Hi , Is there a way I can modify the existing ground profile data rather than creating and importing a ground profile data file? Here's I tried to do…
  • WaterGEMS Glitch on Profile Creation Attempt

    Software: WaterGEMS V8i SELECTseries 4, 08.11.04.57 64-bit. The latest (12/9/13) patches have NOT been installed, but I've put a request in to IT to get 'em! Hardware: 3.16GHz processor, 6GB RAM, 64-bit OS running Windows 7 Enterprise Issue: Crashing…
  • Profile Ground Option (SewerCad V8i)

    Hello Where I can export a file * txt to import the profiles of engineering ? , Any idea where I can get these points? they are grateful. I need to show the profiles ground in my calculations. Thank's so very much!.
  • save annotation definitions as default StormCad V8i

    I think I know the answer to this but I'm really hoping that I'm wrong. I know how to manipulate the annotation settings for the Engineering Profiles, and make them a default setting for my computer. Is there a way to "bring" those setting out of my StormCAD…
  • SewerCAD HGL Profile Error

    I'm getting an odd hydraulic profile in a gravity sewer model where the HGL dips dramatically in the middle of a pipe (Pipe 31744). I've checked the pipe properties and the cannot determine what may cause this issue. The model was constructed from GIS…
  • Hammer Negative Pressure - Instability at Steady State

    Hello, I am using Hammer V8i. I have a simple layout for a pump station transient model. A pump draws from a wet well, and discharges over a syphon into an effluent conduit. The discharge syphon creates a negative pressure at steady state. My transient…
  • Profile - Junctions and reservoir labels

    Is it posible to put: labels of junctions or reservoir on a profile? Other people are going to see this profile but they do not know of which element (junction or reservoir) is this hidraylic grade line or elevation. Thanks, Bernardo Enriquez…
  • Re: Sewergems V8i - Extracting Longsections

    Llyod, You can create and view a profile of any segment of pipes in either program, under View > Profiles. SewerGEMS can export the profile to DXF. Is this what you're looking for?
  • Re: Sewer manhole drop

    Ravi: The hydraulic grade line is computed in all pipes at all time in every SewerCAD analysis. So, to do 'detailed hydraulic grade line analysis' you would simply make good use of the Profile tool (go to View > Profiles in the menu) in SewerCAD…
  • Hammer Scenarios And Profiles BIG Problem

    Hi there, im running a hydraulic system transient test with more than 10 scenarios and I have a really simple but BIG problem. First of all I did compute initial conditions and after that the ransient in all of the scenarios. Before I did…
  • Re: Need a little help with Graphical interpretation

    Clark, Welcome! You have come to the right place. I took a look in the HAMMER help, and it's true we seem to delve into the details a bit without giving a simple diagram explaning what the profiles show. I will make sure we get something…
  • Re: SewerCAD V8i Profiles

    Actually, engineering profiles are not yet available in SewerGEMS. They are however available in SewerGEMS Sanitary. SewerGEMS Sanitary is essentially the same as SewerCAD, but is included with a SewerGEMS installation and can be integrated with ArcGIS…
  • Re: Changing Station Lenght inside Engineering Profile

    Hello Douglas, In the profile manager (where it shows the list of all your profiles), right click the profile and choose "edit". In the screen that appears, you can enter your own custom stationing to suit your specific needs. I hope this…
  • Re: Watercad Profiles

    Hello, 1) In the profile series options, you can add more node fields and they'll be plotted along with the default elevation and HGL. For example, you could add a user data extension for ground elevation and add that to the profile. However, you…
  • Re: StormCad- Profile- Annotation Table

    Unfortunately you cannot add, remove or relabel fields in the annotation table in StormCAD V8i's profiles. "Depth to invert level" seems to be the only field you want that is missing in StormCAD's table though. If you'd like more control over profile…
  • Re: StormCAD Profile Templates

    The engineering profile feature was added in version 08.11.00.24. You can check your version under Help > About StormCAD. To open an engineering profile, open the profile manager under View > Profiles, right click your profile and choose "View engineering…
  • How to design open drains in sewer gems sanitary

    1) how can i design open drains in sewer gems sanitary? 2) I have search the help it shows that rectangular rounded section is avalible but when I try to change the shape , the option for " rectangular rounded section" is not avalible.
  • Re: Profile - Junctions and reservoir labels

    When I use the chart options to modify the profile (like previous example), I can see the changes. Then I close the profile window. When I re-open that profile the changes were not save. How can I save changes on a profile?
  • Re: SewerCAD V8i Profiles

    Hello Seylan, In SewerCAD V8i (08.11.00.52) you can view a 'regular' style profile (double click the profile) or an engineering-style profile (right click > Engineering profile). The former is good for analysis as you're doing your work and has…