• Why does EPS analysis does not giving conduit sizing on increasing loading in sewergems?

    I am increasing the loading but conduit dia remain same in EPS analysis, why this is happning?
  • how to set a flushing manhole in sewergems?

    flushing manhole load is only generated in morning how i can assign load the for 3 to 2 hours in system. using EPS.
  • Equation Used In Hydrogen Sulfide (H2S) Modeling In SewerGems

    Dear All , Kindly i have a question , and i am a little bit confused about H2s Calculations in sewer gems. First Of all i have seen this article and it understand it well : Modeling septicity / hydrogen sulfide (H2S) .] I tried make a comparison…
  • Pump Error "Pump On elevation is not in the range of upstream node bottom elevation and top elevation."

    I have 15 existing pump stations I've already created (30 pumps). Upon creating my most recent pump station I am getting this one error for one of the pumps. I've set up elevations the same way I have for every other pump station. It doesn't make sense…
  • Hydrogen Sulfide Modeling in Sewergems

    Dear Folks , I have run a model with Hydrogen sulfide analysis , after made the analysis i got the result for H2s in and out concentration , my question is : do we have a limit for H2S concentration in sewer pipe line ?? or do we have a code or standard…
  • hydraulic grade line

    Hello Folks , Kindly i have a question related to Sewer-gems Software , my question is about the hydraulic grade line in a sewer networks that modeled throughout Sewer gems or sewer cad . The Hydraulic grade lines have a small jump before manhole…
  • SIG Virtual Workshop: Bentley Hydraulics & Hydrology − February 21, 2018 − You're Invited!

    Make plans to attend the next Bentley Hydraulics & Hydrology Special Interest Group (SIG) virtual workshop, Using the Engineering Standards Feature in Haestad Storm and Sewer Software . This session will be led by Scott Kampa, support engineer, on Wednesday…
  • How to find Water at the Bentley LEARNing Conference May 13-16?

    Here is a list of the water sessions going on at this year's Bentley LEARNing Conference in Phili! BCW2LC1 ‐ Introduction to Bentley Hydraulics and Hydrology Products Tues 2-2:45 pm Lead by H&H AE, Mike Rosh …
  • Channel to culvert problems (SewerGEMS)

    Hi, I am a new user to this community and I'm hoping someone has some insight into a problem i'm running into with my stormwater model. At the downstream of my model 2 of my main pipelines drain into a channel that then cross by way of 4 24" culverts…