• Gate valve

    Hi all I am using WaterCAD CONNECT Edition and I need to know if there is a direct way to install a gate valve from the layout options? and if there no direct option for that what is the best way to draw a gate valve in the system ?? Thanks for…
  • Missing valves in Flushing Field Report

    I have to operate 17 valves in a UDF run, and since the report allows a max of 13 valves, some of them are missing. Is there a way to modify that section in the flushing field report to include all of the operated valves? Thanks, DD
  • How to assign valves to pipes AT NEAREST POINT

    I am a new user to WaterGEMS, and I am trying to build a system from scratch. I have figured out a number of shortcuts, but this one is per plexing to me. When the program assigns valves to the nearest pipe, it assigns them at the midpoint of the…
  • How to use Throttle Control Valve?

    Our network system is operating with throttled valves (with different number of turns for each valve) and I would like to reflect all of it in our water system network in WaterGems. What is the best way and process to apply TCVs in our system?
  • Control Valve

    Hi, I remodeled my pump plant to look as per the pic below using WaterGEMS. I would like to install a valve as it's shown in order to control the pressure at a junction that is not to exceed 10 PSI. I don't want to use VFD pumps for this scenario…
  • Valves

    Hi, I have a pump station that has 5 constant speed pumps (11,700 gpm each) I would like to install a valve that maintains a certain pressure in the system. This valve shall remain close as long as the set pressure is maintained, once the pressure…
  • Mismatches between "Transients results viewer" and "Profiles". HAMMER V8i

    Hello, I am working on the effects of a pump shut down in a quite long pressurized main with HAMMER V8i. My model consists of 3 pumps that deliver 120l/s to a distance of 1800m through a 250mm main. As usual, the main has a very steeped start to exit…
  • Re: valve relative closure

    Benson, Assuming that you're referring to Relative Closure in a valve Operating Rule for a transient simulation in Bentley HAMMER, the below technotes should clarify things for you: Modeling an Initially Partially Closed Valve Modeling Reference…