• WaterCad Select Series 2 Copy Graph Data Problem

    I am having problems with copying data from the graph data tab. My problem is that when I copy all the data the header row is not copied. So when I paste in excel I have no idea what the data in each column represents. This woudn't be a problem if WaterCad…
  • Darwin Calibrator Inactive Elements

    I'm fairly new to the software and have been going through the on demand courses. I have a decent understanding of how Darwin Calibrator works but I'm struggling with one thing. I have numerous inactive pipes in my model. Typically these are either…
  • Use of LoadBuilder

    Hello There, Is anyone could help to explain how to use LoadBuilder? I have imported scaled network, I can obtain all information as such population density, Land use Pattern etc. My problem is I want to assign demands according to area and population…
  • WaterCAD age calculation fails

    I have run into a recent problem. I've been trying to do a age calculation on our water system and for some reason the largest duration I can calculate is 128 hrs. If I change it to 129 hrs the calculation fails and I get an error: Calculation Engine…
  • Average Demand Calculation and Fire Flow

    My model is fine and everything works fine however the design criteria for demand is 2.1 multiply by the average demand + Fire Flow (as indicated in the snapshot) I have setup the Scenarios and alternative for this criteria based on the BASED DEMAND…
  • Unusual Flow Results

    I'm getting some unusual results and am unable to find a solution. I'm trying to better calibrate our model near an area where 2 pressure zones meet. I've performed a fire flow analysis and tried to confirm the pressures and flow in that area. A flow…
  • WaterCad Select Series 2 Unidirectional Flushing - No Option for Pressure Constraint

    The newer version of WaterCAD Select Series 2 seems to have removed the option to specify a pressure constraint for flushing alternatives. I don't know when this was removed, but for me it would be very useful to specify a pressure constraint. The…
  • Reporting the Physical Properties of a Junction

    Hi All, i'm writing a C# code using WaterObjects.NET to report for every junction its Physical properties : (elevator, areas, emitter coefficent). Which classes/feaures may help me? For example from the programming manual i found that scenarios…