• WaterCad Select Series 2 Copy Graph Data Problem

    I am having problems with copying data from the graph data tab. My problem is that when I copy all the data the header row is not copied. So when I paste in excel I have no idea what the data in each column represents. This woudn't be a problem if WaterCad…
  • Changing Length (Scaled) in water cad v 8i

    Can we change the setting Length (Scaled) m to normal custom length m . (Where we can enter our own length values). U can see the picture to get clear Idea. Thank You
  • WaterCAD age calculation fails

    I have run into a recent problem. I've been trying to do a age calculation on our water system and for some reason the largest duration I can calculate is 128 hrs. If I change it to 129 hrs the calculation fails and I get an error: Calculation Engine…
  • Initial conditions,KNOWN water level in the tank in every time step

    Regards to all. The existing water supply network belongs to III elevation zones of much larger water supply system and ends with the tank of III elevation zone. It is necessary to design new water supply network of IV elevation zone. In the…
  • Average Demand Calculation and Fire Flow

    My model is fine and everything works fine however the design criteria for demand is 2.1 multiply by the average demand + Fire Flow (as indicated in the snapshot) I have setup the Scenarios and alternative for this criteria based on the BASED DEMAND…
  • cannot control the flow stored

    Hi I am designing a water supply system of a city in which I am using 14 pumps to supply water to 6 tanks and from each tank the water is supplied to junctions. Both junctions and pumps have different patterns. I am facing following problems …
  • WaterCad Select Series 2 Unidirectional Flushing - No Option for Pressure Constraint

    The newer version of WaterCAD Select Series 2 seems to have removed the option to specify a pressure constraint for flushing alternatives. I don't know when this was removed, but for me it would be very useful to specify a pressure constraint. The…
  • Reporting the Physical Properties of a Junction

    Hi All, i'm writing a C# code using WaterObjects.NET to report for every junction its Physical properties : (elevator, areas, emitter coefficent). Which classes/feaures may help me? For example from the programming manual i found that scenarios…
  • Water Distribution Modeling Software Survey

    Hello, If you have a few minutes please fill out this short survey to help the Bentley Institute Geospatial team create better training that is more suited to the workflow of our users. http://www.surveygizmo.com/s3/568508/Water-Distribution-Modeling…