• Best way to duplicate waterlines and junctions for correct demand input

    I need to duplicate some pipelines and junctions in my model. The water leads connecting the waterlines to adjacent lots are only represented by one line when there should be two. Trying to input the correct demand (gpm) without just doubling the demand…
  • WaterGems VSD Pumps in Parralel and error message 41797

    I am using Watergems V8i series 3, and trying to model a pump station with two identical VSD pumps in parallel. When I set the pumps up in parrallel, i.e. by just making them have a common node on either side of the pumps, the system balances but only…
  • WaterCad Select Series 2 Copy Graph Data Problem

    I am having problems with copying data from the graph data tab. My problem is that when I copy all the data the header row is not copied. So when I paste in excel I have no idea what the data in each column represents. This woudn't be a problem if WaterCad…
  • How to design open drains in sewer gems sanitary

    1) how can i design open drains in sewer gems sanitary? 2) I have search the help it shows that rectangular rounded section is avalible but when I try to change the shape , the option for " rectangular rounded section" is not avalible.
  • Darwin Calibrator Inactive Elements

    I'm fairly new to the software and have been going through the on demand courses. I have a decent understanding of how Darwin Calibrator works but I'm struggling with one thing. I have numerous inactive pipes in my model. Typically these are either…
  • Initial conditions,KNOWN water level in the tank in every time step

    Regards to all. The existing water supply network belongs to III elevation zones of much larger water supply system and ends with the tank of III elevation zone. It is necessary to design new water supply network of IV elevation zone. In the…
  • Reporting the Physical Properties of a Junction

    Hi All, i'm writing a C# code using WaterObjects.NET to report for every junction its Physical properties : (elevator, areas, emitter coefficent). Which classes/feaures may help me? For example from the programming manual i found that scenarios…
  • Water Distribution Modeling Software Survey

    Hello, If you have a few minutes please fill out this short survey to help the Bentley Institute Geospatial team create better training that is more suited to the workflow of our users. http://www.surveygizmo.com/s3/568508/Water-Distribution-Modeling…