Bentley Communities
Site
Search
User
Site
Search
User
Product Communities
OpenFlows | Water Infrastructure
OpenFlows | Water Infrastructure Forum
Sign In
All tags
WaterGEMS V8i
Watercad #watergems
analysis
hydraulics
Hydraulics and Hydrology
hydrology
Tanks
water distribution
Water Hammer
Water Modeling
WaterCAD
WaterCAD V8i
WaterGEMS
watersupply
Low pressure and high velocity
Ragavendra V
Hi, I am a doing modelling for improvement of the existing system. Many location velocities are high and pressure is low. Even I tried to increase the pump capacity the pressure is not increased. Please check the model in the below following link…
over 3 years ago
OpenFlows | Water Infrastructure
OpenFlows | Water Infrastructure Forum
No Flow in tank Top inlet fill
Ragavendra V
Hi, I have another issue in the model, If you check the T-1 inlet it was connected as a top inlet. When I run the simulation for avg daily demand I don't have any issue. However, when I run the same model with Max daily demand scenario (Peak factor…
Answered
over 3 years ago
OpenFlows | Water Infrastructure
OpenFlows | Water Infrastructure Forum
watergem failed to validate model. the model may be corrupt or contain incomplete information
Ragavendra V
Hi, I have an issue validating this water gem file. Even I am using the latest version of water gem update 210.02.01.06 64-bit it is still showing the same error. Please let me know how to fix this error. I have uploaded the file in the below wetransfer…
Answered
over 3 years ago
OpenFlows | Water Infrastructure
OpenFlows | Water Infrastructure Forum
isolation valve position
mohamed tablia
Hello, How could I locate an isolation valve at a specific position on a pipe with a schematic drawing? Can an isolation valve replaced by another type of valves in watergems to do the same task?
Answered
over 4 years ago
OpenFlows | Water Infrastructure
OpenFlows | Water Infrastructure Forum
View related content throughout OpenFlows | Water Infrastructure
More
Cancel