• What is the best method for adding new pipelines to existing models whose diameters are frozen? The intent is to minimize design errors and meet requirement of minimum residual head at all nodes

    We have executed distribution network models from about 20 tanks to 20 independent service areas for a client. Pipelines are laid. Now client wants to extend all the networks, by adding 10-15% of pipelines in all models. I have dxf files containing…
  • how to find wall thickness and class of Galvanised iron pipe?

    can i find wall thickness in watergems or i have to take the help of hammer. how to design the pipe for particular grade( like mserw grades (grade a or grade b or X42)) or class (like Gallvanised iron (light , medium and heavy class) in watergems.
  • Bentley SewerGEMS under-sizing drain sections during automated design run

    Dear Bentley Team, We are designing a storm water network for a city with box type conduits in SewerGEMS 10.03.04.53. I notice that when running the automated design some conduits are under-designed. I checked all the constraints and parameters but couldn…
  • Design of Wastewater treatment plant

    Hello Friends***I want to use one software to draw my design of wastewater treatment plant ***Can someone please help me***Thank you so much.
  • Diseño con caudales mínimos

    Quiero compartir con todos los usuários un articulo acerca de la aplicación de SewerCAD/SewerGEMS en diseños de redes de alcantarillado sanitário, donde hay critérios de caudales mínimos que deben ser cnsiderados. En algunos paises latinoamericanos y…
  • SIG Virtual Workshop: Hydraulics & Hydrology - November 15, 2017 - You're Invited!

    Mark your calendar and plan to attend the next Bentley Hydraulics & Hydrology Special Interest Group (SIG) virtual workshop on Wednesday, November 15, 2017 at 9 a.m. EST or 7 p.m. EST . We will discuss how to design stormwater detention using the PondMaker…
  • RE: Egg shaped conduit.

    I've reviewed design mode with the Egg Shape conduit and it does not appear to be functioning with the checkbox under the "Available for Design" column checked. If the Class Availability "Available for Design" option near the bottom of the window is greyed…
  • RE: Egg shaped conduit.

    This wiki article lists all the shapes that are available for design. The shape may be available for design, but the class of shapes as a whole unit may not be available, so each entry would have to be checked off individually.
  • Weirs design problems

    I am designing a sewer network with several weirs and outfalls. For modelling the weir I am using a control structure (inline weir) in the rainwater outlet and a orifice control structure in the waste water outlet. The obtained results…
  • SewerCAD Design Issue

    The sewerCAD model is attached and the problem I have that I created selection sets and need to force the program to size the pipes in the selection sets (2 & 3 ) to be 200mm, so I create new catalog for the conduit " Only 200 " and I made 200mm is only…
  • Pipe Size Design

    I changed my 'Calculation Type" option from 'Analysis' to 'Design' but StormCad is not designing my pipe system and it keeps showing the default pipe size of 12-in. I'm used to older StormCad versions where one click was all that was needed to run the…