• Watercad tools for selecting a pump

    I am running a max day scenario in steady state and I am getting low pressures in several nodes. I would like to determine the pump settings that will increase the pressure at those nodes. So far the only method I have been using is to manually change…
  • Pumps performance

    Good evening i have problem with the results of the network's pressure and flow when the pumps in the shutdown in the EPS mode the graphs of the junction's pressure shows unreasonable results so i need to know the correct way of modeling a water…
  • Manufacturer's Pump Data importing to WaterGEMS Pump Definition

    Hi, I have a copy of a submersible pump data sheet and I would like to ask, what is the best way to reflect manufacturer's pump data to WaterGEMS' pump definition? Thank You. Justine
  • Low Pressure Sanitary Sewer - Negative Pressures

    I'm modeling a low pressure sanitary sewer. The goal is to see how the system reacts as homes/grinder pumps come online. The issue I'm having is with only a single grinder pump operating to start in a steady state analysis, the system HGL goes negative…
  • Network setup

    Dear All, Am setting up a model of a water distribution network for 3 small towns. The network consists of one pumping main to an overhead tank( Name is Mandungu Tank) which then distributes the water to 4 other smaller tanks along the way. The small…