• Pump Set to Off But is Adding Energy to the System

    This is in WaterCAD CONNECT Edition. My question stems from an issue with a tank in my model keeps overflowing during EPS run (fills up, remains full, doesn't drain). I believe I have identified the hydraulic grade is being supplied by a certain pump…
  • No Flow in tank Top inlet fill

    Hi, I have another issue in the model, If you check the T-1 inlet it was connected as a top inlet. When I run the simulation for avg daily demand I don't have any issue. However, when I run the same model with Max daily demand scenario (Peak factor…
  • Tank and end connections

    Hi, How to draw a pipe layout . The case is "a Pump pumps in water from a underground tank to a tank on a building". Now as in water cad we insert a tank on the building and connect it to a pump and inturn connects to the U/G tank. BUT we have to provide…
  • Re: Enhancement of Elevated Storage Reservoir

    Amine, One of the best parties to contact for information like this would be the Tank Manuf themselves - they have a vested interest in showing you how well their product looks in particular conditions - get a hold of a local equipment rep and…