• Composite outlet structure for Ponds

    When doing a new composite outlet structure with orfice and weir, does the rating table information need to be something that is put in prior to running the model? or is the rating table and curve table populated after running the model? I am updating…
  • How does "constant flow" for pond seepage method?

    Hi, I was wondering if I did the "constant flow" method does the pond need to be using Elevation-Area or one of the other options under the volume type that are available? Also i am aware that the solver should be implicit or the GVF-Rational (StormCAD…
  • Multiple Pond Model with Reverse Overflow

    I've never had to do multiple pond modeling. So this is a first for me. I actually have a couple questions. 1. How do you connect a pond outlet to an Inlet (All of these will be risers)? (Pond 5 needs to overflow into the system using DA-3) . (Pond…
  • Using CivilStorm, StormCad and PondPack with InRoads and Microstation

    Working a roadway project including multiple pipe networks, detention basins, infiltration basins, channels, and culverts. Need to streamline the hydraulic and hydrologic analysis. Using Power InRoads V8i for site/roadway design. Considering using CivilStorm…
  • Modeling Mulitple Ponds in Series

    I'm trying to model a set of small ponds each connected in series. The ponds recieve water from their respective drainage basins, and from water overtopping or seeping from the upstream ponds. The ponds would overtop through a weir after achieving max…