You are currently reviewing an older revision of this page.
When running a flushing analysis, the following user notification is generated:
"Reference to a deleted or inactive element of interest."
This issue is occurring because one or more pipe (or one or more node) is included in the flushing event is either inactive or has been deleted from the model. To resolve this, open the Flushing manager under Analysis > Flushing. Selected the flushing area that is affected and go to the Options tab. Then selected the ellipsis ("...") button next to the Pipe Set collection field.
After selecting the ellipsis button, if there are pipes that are in the collection have are no longer in the model, you will receive a message indicating this. Clicking Okay will remove the pipes.
Click the ellipsis button next to the Nodes of Interest collection and see if you get a similar message, stating that one node in the collection has been deleted. Clicking Okay will remove the node.
When this is done, the collection for the Pipe Set and Nodes of Interest should be updated and accurate. Try rerunning the flushing analysis and the issue should no longer occur.
If the above dialog does not appear or if the software crashes, please try these steps:
(Reference # 761664)
Steps for V8i SELECTseries 6, or if recreating the pipe set is acceptable:
1) Reopen the model, open Flushing, click the Area/Zone in question and click the ellipsis button next to the Pipe Set2) Dismiss the error dialog with the "X"3) Click the "cancel" button and dismiss the second error dialog that appears4) Click "OK" - note that the pipe set now shows zero elements5) Click the ellipsis button and re-select the pipes of interest. If you would like to select all pipes in the model, either use the pipes query, or draw a box around the entire model to select all.
Steps for CONNECT Edition:
1) Open the model and save it (in the new CONNECT Edition format)2) Choose Tools > Database Utilities > Compact Database. Choose yes on the prompts.3) Save the model4) Open Flushing, click the Area/Zone in question, click the ellipsis button next to the pipe set5) Click the select in drawing button, then click the green check mark > OK. The number of elements should now reflect the actual number (no longer including the deleted elements).
Flushing in WaterGEMS/WaterCAD V8i SELECTseries 4 and SELECTseries 5
Flushing in WaterGEMS/WaterCAD V8i SELECTseries 6 +