Compacting data causes element display issues

Applies To
Product(s): Bentley WaterGEMS, Bentley WaterCAD, Bentley SewerGEMS, Bentley SewerCAD, Bentley StormCAD, Bentley CivilStorm, Bentley HAMMER
Version(s): 08.11.xx.xx
Environment: N/A
Area: Modeling
Subarea:
Original Author: Scott Kampa, Bentley Technical Support Group

 

 

 

 

 

 

 

Problem Description

After compacting the database, the position of the elements have changed. For instance, many of the pipes or conduits are now connected to a single junction.

Steps to Resolve

This is a rare issue that occurs when the drawing becomes out of sync with the database. To resolve it, go to the Tools pulldown menu, then select Database Utilities > Synchronize Drawing. This should sync the drawing back up with the database.

  • Created by Bentley Colleague
  • When: Thu, Feb 20 2014 3:53 PM
  • Last revision by Bentley Colleague
  • When: Thu, Feb 20 2014 3:58 PM
  • Revisions: 2
  • Comments: 0
Anonymous
Recommended
Related