You are currently reviewing an older revision of this page.
I have placed Logical Controls in my model but am getting the followingerror message when computing the Implicit Engine in SewerGEMS SS3?"Pressure engine controls are ignored by the Implicit (SewerGEMS DynamicWave) solver. They can only be used with the GVF-Convex (SewerCAD)solver."Why am I not able to use the Logical Controls?Product: SewerGEMS V8iVersion: 08.11.03.77Area: General, Problem ID#: 84530, GENERALINFORMATION
There are three types of Controls in SewerGEMS SS3.Logical ControlsOn/Off Elevation - Operational ControlsSWMM ControlsWhen Using the Implicit Active Numerical Solver, only the On/OffOperational Controls can be used.The GVF-Convex solver can use the On/Off Operational and LogicalControls.The Explicit Solver can use the On/Off Operational and the SWMMcontrols.The GVF-Rational solver does not use any controls because theGVF-Rational runs only a Steady State model.The easiest Controls to use during conversion from one Active Solver tothe next is the On/Off Operational Controls.The On/Off Operational Controls are available in the Properties for therespective Pump.To use the Logical Controls, you must use the GVF-Convex solver.