You are currently reviewing an older revision of this page.
Haestad product model files stored in ProjectWise don't open properly when you double click on them.
If you drag and drop files into ProjectWise, will this create a relationship between the group of files on Projectwise?Problem ID#: 43637
It is very likely you dragged and dropped the files into ProjectWise. To confirm this look for a little white icon in the lower right hand corner of the file icon. If it's not there you can assume that this is what happened. Model files need to be saved to ProjectWise from within the product in order to properly link them as a File set / Link set.In order to fix the file association follow these steps:1) Move the files to a location on your hard drive where they can be easily accessed such as your desktop or C:\2) Open the Haestad product (such as StormCAD) and ensure that it is properly configured to integrate with ProjectWise. Log into ProjectWise.3) Open the file by going to FILE > OPEN4) Once the file is open, go to File > save As (which will automatically open the ProjectWise save dialog if you are integrated). Or, if using an older version (which integrates differently with ProjectWise) go to FILE > PROJECTWISE > SAVE AS and save to your ProjectWise folder of choice.NOTE: This links the database file (ex: .stsw.sqlite) to the program file (ex: .stsw) so the file will now open correctly. When the files are dragged and dropped in this Link Set is not established.
What is the workflow for using ProjectWise with the MicroStation integrated interface and the Haestad product line?