View Batch Run Results with Scenario Calculation Summary and Report Builder

  Product(s): WaterGEMS, WaterCAD, SewerGEMS, SewerCAD, StormCAD, CivilStorm, PondPack, HAMMER
  Version(s): CONNECT Edition
  Area:  Output and Reporting
  Original Author: Craig Calvin, Bentley Technical Support Group

How To

View Calculation Summary for multiple scenarios after a Batch Run.


The Scenario Calculation Summary dialog displays results for one scenario at a time


To open the Calculation Summary Dialog in CONNECT Edition, go to Home > Summary or Analysis > Summary. In V8i, go to Analysis > Calculation Summary


To view the summary for a different scenario after computing a Batch Run:

1. Close the Scenario Calculation Summary dialog

2. Change the current scenario

3. Open the Calculation Summary again.

Note: Options for changing the current scenario are discussed in the wiki "Scenario and Alternative Management".


To create a report with Report Builder in PondPack:

1. Compute the scenarios to be compiled with Report Builder using Batch run

Note: The Batch Run process is explained in the wiki "Scenario and Alternative Management" and in the help article "Running Multiple Scenarios at once (Batch Runs)".

2. Open Report Builder

Option 1 - From the Scenario Calculation Summary dialog

Click the Report button and select Report Builder

Option 2 - From the Report menu

Option 3 - Press [Ctrl+R]

3. In the Report Builder Scenario Selection dialog:

a. Check the calculated scenarios to include in the report
b. Click OK

4. In the Report Builder dialog:

a. Select the sections to include in the report
b. Enter a Report Title
c. Click the down arrow next to the Generate Preview icon
d. (Optional) Select the Options button and edit the project properties and page setup.
e. Select Full Report

See Also

Scenario and Alternative Management

Help: Running Multiple Scenarios at Once (Batch Runs)