You are currently reviewing an older revision of this page.
View Calculation Summary for multiple scenarios after a Batch Run.
To open the Calculation Summary Dialog:
From the Analysis Menu…
…or, from the Compute toolbar
To view the summary for a different scenario computed with Batch Run:
1. Close the Scenario Calculation Summary dialog
2. Change the current scenario
3. Open the Calculation Summary again.
Note: Options for changing the current scenario are discussed in the wiki "Scenario and Alternative Management".
To create a report with Report Builder:
1. Compute the scenarios to be compiled with Report Builder using Batch run
Note: The Batch Run process is explained in the wiki "Scenario and Alternative Management" and in the help article "Running Multiple Scenarios at once (Batch Runs)".
2. Open Report Builder
Option 1 - From the Scenario Calculation Summary dialog
Click the Report button and select Report Builder
Option 2 - From the Report menu
Option 3 - Press [Ctrl+R]
3. In the Report Builder Scenario Selection dialog:
a. Check the calculated scenarios to include in the reportb. Click OK
4. In the Report Builder dialog:
a. Select the sections to include in the reportb. Enter a Report Titlec. Click the down arrow next to the Generate Preview icond. (Optional) Select the Options button and edit the project properties and page setup.e. Select Full Report
Scenario and Alternative Management
Help: Running Multiple Scenarios at Once (Batch Runs)