You are currently reviewing an older revision of this page.
Bentley WaterGEMS, Bentley SewerGEMS, Bentley CivilStorm, Bentley StormCAD, Bentley PondPack, Bentley SewerCAD, Bentley HAMMER, Bentley WaterCAD
Changing the time or date options for a graph
In V8i SELECTseries 2 and newer, the time and date format can be customized. This applies to numerous different things, such as graphs, tabular data, inflow hydrographs, the Time Browser, etc)
1)) When looking at a time field, right click and choose "units and formatting". You can now select from an array of time formats
2) For graphs, right click on directly on the time axis (highlighted by the red box below) and choose "time properties" (see the green box below).
The set field options dialog box will open where you choose what type of time and date to see for the graph.
3) With the graph option select chart options from the drop down shown in the screen shot below
4) In the chart options dialog browse to the Axes tab > select 'Bottom Axis' > click the "Change" button on the 'Minimum' tab and set the time. The same can also be done for the maximum tab to lengthen the time shown on the graph. If you'd like to change the increment value click the "Change" button located above the Minimum and Maximum tabs.