"The results for aspects Criticality and Pipe Break are required to compute the score for Hydraulic Risk."

   
  Applies To 
   
  Product(s): Bentley WaterGEMS, WaterCAD
  Version(s): 08.11.05.61
  Environment:  N/A
  Area:  Other
  Original Author: Jesse Dringoli, Bentley Technical Support Group
   

Problem

When attempting to compute Pipe Renewal Planner with Hydraulic Risk checked, it fails with the below error:

"The results for aspects Criticality and Pipe Break are required to compute the score for Hydraulic Risk."

Solution

First, ensure that  both the Pipe Break and Criticality aspects have the box checked to the left of them and that the results are valid (try running Pipe Renewal Planner with only those two checked first).

If you still encounter the message even when both Pipe break and Criticality are checked and have valid results, you may be encountering a known issue in SELECTseries 5 (reference number 221296) that can happen if the Pipe Break and Criticality aspects use different scenarios. As a workaround, configure the model to use the same scenario for both aspects. This issue should be addressed in a future release.

See Also

Anonymous
Recommended
Related