You are currently reviewing an older revision of this page.
Are pipe lengths & slopes based on the distance between the upstream/dpownstream structure (eg. catchbasin) walls, accounting for the length and width of the structure?Problem ID#: 35487
Currently, the width/length of the structure is not considered and is only used in the headloss calculations. Pipe lengths & slopes are calculated based on center-to-center distance. Meaning, the pipe length & slopes are calculated based on the difference between the upstream invert and the downstream invert of the pipes.
Civil product profile length not matching StormCAD engineering profile length
Scaled Length difference between Subsurface Utilities products & Haestad standalone products.