You are currently reviewing an older revision of this page.
How can I find the total volume of water through a certain element in SewerCAD and SewerGEMS
or
How can I see the total volume of flow at an outfall over the course of a EPS simulation? (such as 24 hours)Problem ID#: 63587
1) Right click on the element and choose "totalizing flow meter". In this tool you can select the time frame and report water volume. Multiple elements can be selected at once by holding down the CTRL button on your keyboard and left clicking to select the elements.Click the Totalizing Flow Meter Details tab to see more details. Click the "Select from Drawing" button in the upper right corner to select multiple elements.
2) Right click the outfall, choose Data Table, select the "Volume (Total out)" field, click OK and scroll to the bottom of the table. The volume at the last time step will be the total volume of water that has left the outfall.
3) Open the Time Browser under the Analysis menu, then select the last time step. Then, look at the "Volume (Total out)" field in the properties of the outfall. This will show the total volume of water that has left the outfall.
What is the difference between positive volume and negative volume in the Totalizing Flow Meter?
Finding total demanded volume for a scenario in WaterCAD and WaterGEMS