You are currently reviewing an older revision of this page.
After computing a model an error appears stating "H&H-SewerGEMS stopped working".Clicking on the button outlined in red above will display the Exception.log file with the following message:
"System.ArgumentOutOfRangeException: Specified argument was out of the range of valid values.Parameter name: Index was out of range. Must be non-negative and less than the size of the collection.Actual value was -1."
The above errors may be due to RTK values in a RTK Table.
Make sure all values used are within an acceptable range (Components menu > RTK tables).
The RTK parameters are:
R - fraction of precipitation that enters the collection system for that component
T - the time from the precipitation pulse to the peak of that component of the hydrograph
K- the ratio of the time to peak to time to end of hydrograph for that component.
K is usually on the order of 1.5 to 2.5.
The sum of the R values for all components should be positive but less than 1.
The default units for T is hours while R and K are dimensionless.
SewerGEMS Help Article "Assembling RTK Parameters"