You are currently reviewing an older revision of this page.
After running the model, the results fields show as N/A
1) Ensure that the model computed successfully and that there are no red user notifications showing. You can sort the table on ID or name if red notifications do not show at the top. In almost all cases, a red notification indicates a data entry issue that stopped the calculation from completing, in which case the results are not saved and show as "N/A". Use the Validate tool to get a full list and resolve the red messages before attempting to compute the model.
2) Ensure that you are looking at a result field that is applicable to the type of calculation or solver being used. In some cases a result field my not be applicable in every case. If other, basic results are showing, then most likely the "N/A" results you see mean that they are not applicable for the current solver and analysis type, or configuration of the element.
3) If the above does not help, use the Compact Database tool (For CONNECT Edition and greater this is under File > Database Utilities. For V8i and under, this is under Tools > Database Utilities. Lastly, re-compute the model.
For other more specific examples of why a result may show as N/A, see below articles:
Why does the precipitation(cumulative) field for catchments show N/A at the 24 hour time step after computing ?
Flow appearing as N/A when using an Output Selection Set
Results show as "N/A" when clicking a node in the Fire Flow Results Browser
After computing the model, the pump efficiency results are listed as N/A
I'm seeing zero or N/A for water quality results (trace, age or constituent)