You are currently reviewing an older revision of this page.
Is there a way to get results for a pump station element when justrunning a hydraulic analysis? All I see is results for an EnergyAnalysis.Product: WaterGEMS, WaterCADVersion: 08.11.03.17Area: Output/Results Presentation, Problem ID#: 69834,GENERALINFORMATION
The results seen within the properties of the pump station are the onlyavailable results. Although many of these results are energy costrelated, there are some that may be considered "hydraulic". Forinstance, the "Flow (total)" will show the total flow through the entirepump station for each time step, and the "Volume Pumped (cumulative)"will show the cumulative volume of water that has passed through theentire pump station. To view these results, you will need to compute anenergy cost simulation, under Analysis > Energy Costs. You can stillcompute energy cost without entering any pricing information.Of course, the other main purpose of the pump station element is toaccomodate the Combination Pump Curve tool, which can be accessed fromright clicking the pump station.Beyond that, you would need to look at the properties of each individualpump to see for example the pump head, flow, relative speed factor, etc.If you are looking for some result in particular, please let me know.