You are currently reviewing an older revision of this page.
When looking at the total length of pipe in the Project Inventoryreport, the value is different than the total length in the flextables.Problem ID#: 90942
First, the Project Inventory report will show the length of only theactive pipes in the model. If there are any inactive pipes, they willnot be included and may skew the results from the FlexTable.If that is not the case, make sure that you are looking at thestatistics of the calculated "Length" field, not "Length (Scaled)" or"Length (User-defined)". If you have a combination of scaled anduser-defined lengths and look at only one of these columns, that willresult in a different length as well. The "Length" calculated field willdisplay the length of the pipe, whether it is scaled or user-defined.