You are currently reviewing an older revision of this page.
The purpose of this TechNote is to help you understand the OpenFlows Hydraulics and Hydrology (H&H) functionality in Subsurface Utilities, within Bentley's Civil products. It explains which programs it is available in, and the availability of Hydraulics & Hydrology tools within them.
The Hydraulics and Hydrology functionality that is available in the OpenFlows SewerGEMS, CivilStorm, StormCAD and SewerCAD products was introduced in the SELECTseries 4 (SS4) version (08.11.09.845) of Bentley Civil products. Prior to that Subsurface Utility Engineering (SUE) tools were introduced in SELECTSeries 3 Civil products (version 08.11.09.674+). Since then the CONNECT Edition products have been introduced. These supersede the MX, InRoads, PowerCivil and GEOPAK products.
Here is the list of Civil products for which Hydraulics and Hydrology functionality is available:
Note: this does not apply to these products if they are used in the AutoCAD environment.
Hydraulics and Hydrology functionality will help users design and analyze all underground utilities, in a single product. It contains the following features:
Hydraulics and Hydrology Functionality
With the availability of the Subsurface Utilities tools within your Civil products, you can perform the following things:
For SELECTseries 4 products:
For CONNECT Edition products:
Most of the tools of OpenFlows storm-sewer products are available within Subsurface Utilities tools.
For SELECTseries 4:
For CONNECT Edition:
The CONNECT Edition Civil products also enable more Report options than the SELECTseries 4 versions:
Licenses available
To change the active license:
For SELECTseries 4 products, go to Tools > Product Add-ins > Subsurface Utility Analysis and Design > Current Hydraulics Analysis product > Change the active license.
For CONNECT Edition products, go to Subsurface Utilities>Tools>change the active license.
Version of OpenRoads
08.11.09.845
10.00.00.12
10.01.00.15
10.02.00.60
10.03.00.43
10.05.00.30
10.06.00.38
10.07.00.56
10.07.03.18
Date Released
8/31/2015
03/27/2017
06/22/2017
12/11/2017
04/06/2018
10/03/2018
12/16/2018
3/29/2019
03/10/2019
Compatible version of Storm-sewer products
From 08.11.05.58 To 08.11.05.58
From 08.11.05.58 To 08.11.05.113
From 08.11.05.58 To 10.00.00.40
From 08.11.05.58 To 10.00.00.45
From 08.11.05.58 To 10.01.00.70
From 08.11.05.58 To 10.01.01.04
From 08.11.05.58 To 10.02.00.52
From 08.11.05.58 To 10.02.00.55
A Storm or Storm Sewer file can be updated in standalone and opened in Subsurface Utilities using the steps below:
1) Open the .DGN file using any of the hydraulics and hydrology Select Series 5 or CONNECT version standalone products.
2) Update and save the file
3) Open the file in one of the Civil products.
4) Go to the Subsurface Utilities Menu > Tools > Synchronize Drawing... The file should update.
Subsurface Utilities (SUE and StormCAD) Video Clips, TechNotes & FAQs
Performing clash detection of storm/sewer/water models using Bentley Products
Video: Clash Detection
OpenRoads Special Interest Group (SIG) FAQs
OpenRoads Designer CONNECT Edition - Wiki Articles and Videos