You are currently reviewing an older revision of this page.
One control is changed in the controls tab and it changes another control
The two controls are referring to the same condition and/or action, depending on the part of the control statement that is changing.
For example, both controls here refer to the action for pump PU5 with a status of off. If you change one control the other control will change because there is only 1 action (A965) that refers to the off control. See the screen shot below:
If you create a second action with that has a different ID and assign it to the other off control from the first screen shot that will resolve the problem. See the screen shot below for the two different action ID's for pump 5.
In Select Series 6 and up of WaterGEMs
Creating controls, conditions, and actions