OpenFlows | Water Infrastructure
OpenFlows | Water Infrastructure Wiki
Is it possible to model a fixed flow VSP where the flow changes over time?
OpenFlows | Water infrastructure Wiki
Help and Documentation
Licensing / Activation
"File not found" message when trying to open model file
Adding check valves and reversing pipes
Automated design only on certain elements
Automatic inlet spacing
Can a model be detached from a DWG when integrated with AutoCAD?
Can demand data be exported to an Excel file for use in another model?
Configuring TCV relative closure patterns for EPS
Copying properties of existing elements using Prototypes
Creating selection sets based on profiles
Elements seemingly changing to default settings, zero status, inactive
Error in ModelBuilder: Error: Unable to open table. An item with the same key has already been added
Error opening existing model: "Parameter name: Index was out of range"
Error performing standard tasks: "Value does not fall within the expected range"
Error splitting pipes: "1: no such column: Calibrator_RoughnessGroupID"
Error when updating model with ModelBuilder: Index was outside the bounds of the array.
Finding customer meters not connected via a lateral
Fire flow error message: "Fire flow reference to a deleted selection set."
Flow choking effect with turbines as speed increases
Global Editing Element Information
How do I design certain pipes to have different design constraints from those specified in the Default Design Constraints?
How do I model parallel fixed head (target head) variable speed pumps that are controlled by flow in a downstream pipe?
How do I reverse the start and stop node for a pipe, conduit, gutter, etc...?
How is the headloss for a weir calculated in the control structure for the storm and sewer products?
How to create a selection set of elements within a polygon in ArcMap
How to include result fields or pre-defined parameters in Multi Species Extension (MSX) for analysis?
How to move, scale or rotate a model to the correct location?
Hydraulics and Hydrology Video Series
Identifying elements based on user notification
Identifying overlapping elements between two selection sets
Is it possible to model a fixed flow VSP where the flow changes over time?
Keeping a Hydraulic Model in Sync with a GIS
Limiting conduit design to only certain sizes
Modeling a combined storm/sewer collection system and potable water distribution network
Modeling a Drainage Ditch
Modeling a gutter junction
Modeling different scenarios with downstream pipe for a pump or valve
Modeling Variable Speed Pumps (VSP) and Variable Speed Pump Batteries (VSPB) In Storm and Sewer Products
Modeling variable speed pumps (VSP’s) in parallel
Options for modeling an outflow that varies with pressure
Order of automated design priorities for StormCAD (GVF-Rational) and SewerCAD (GVF-Convex)
Required Input properties for using a Bentley Hydraulics and Hydrology application integrated with ArcGIS (ie. Data Model)
Running a fire flow analysis in EPS (Extended Period Simulation)
Select a desired element from overlapping elements
Storage volume of wetwell and pipe
The following error occurs with the MicroStation-integrated version a OpenFlows product, like WaterCAD or StormCAD: "Unknown key-in or command".
The program hangs when opening a model
Troubleshooting stability problems with PRVs or PSVs in parallel
Understanding the "Boundary Condition Type" for an Outfall
Understanding the "Design point" (1 point) pump definition type
Unknown Command "<command>" error message occurs when trying to run an operation in Bentley product when integrated with AutoCAD
Using Catchment Delineation
Using the IN operator to query for elements in a set list of criteria
Using Zoom Dependent Visibility to cause elements to disappear at certain zoom levels
WaterObjects.NET - Extending the capabilities of your OpenFlows product
Zero (or near-zero) headloss or flat profile appearance with pressurized conduits
Layout and Data Input
Output and Reporting
OpenFlows Product TechNotes And FAQs
Check boxes do not appear in tables such as Control Sets dialog
Consuming ContextCapture production files within your hydraulic model
Convergence NOT achieved Message when computing StormCAD or SewerCAD model
Converting Junctions or Hydrants to Isolation Valves
Displaying Shapefile Labels (Text) As a Background
Enhancing OpenFlows multi-user workflows with ProjectWise Share
Error 32768 when opening model while integrated with ProjectWise
Errors installing patch set
Error when opening PondPack: "Object reference not set to an instance of an object" or "Application has generated an exception that could not be handled."
Error when saving or validating: System.AccessViolationException: Attempted to read or write protected memory.
File Open Dialog does not appear
Flextable Report of Multiple Element Types
Get to know OpenFlows CONNECT Edition
Get to know WaterGEMS, WaterCAD and HAMMER CONNECT Edition
How do I import/export multiple point pump curve pump definitions into a model using ModelBuilder?
How do you save backup files, so they save at different times and multiple levels?
How does the intermediate geodatabase (.MDB or .GDB) file function with ArcMap and ArcGIS Pro integration?
How to Delete Engineering Libraries if you get a message about a Read-only database
How to receive alerts on new version availability?
How to register DAO360.dll or a dll file?
How to search using wild cards on a sqlite type of database
How to See Hebrew or Arabic text in a .DXF file that was exported from WaterGEMS/WaterCAD
Hydraulic grade discontinuity at steep pipes or across nodes (frontwater analysis)
I get a red user notification that says, "Inlet guttter mannings n should be greater than 0".
Importing .HLB library files from old product versions into format used in the V8 product versions
Importing External Data in Geographic Coordinate Systems
Importing storm data and other library information from older versions
Changing element symbols in the AutoCAD platform
Locating OpenFlows product error log file
Locating OpenFlows Product Version Number and License Information
Model backward / forward compatibility
Model can be opened and used by multiple users
Modeling a closed loop system
Modeling a flow split (diversion) with the SewerCAD or StormCAD numerical solver
Modeling turbine load acceptance plus load rejection
Multiple CN numbers for a catchment and multiple catchments with a single outlet node
Network Navigator Trace Upstream/Downstream does not return any elements
OpenFlows software numerical solver theory
Percent Connected Impervious Areas and Percent Unconnected Impervious Areas
Performing a hydrosanitary design in WaterGEMS or WaterCAD
PondPack user notification: "The composite outlet structure is either not selected or deleted."
PondPack: How to perform a critical duration analysis?
Pressure pipe vs. conduit between pump and wetwell
Print Preview > Fit to Page shows blank page
Properties not working when using MicroStation integration with ProjectWise
Properties, Flextables, user notifications, or other dialog is missing or will not open in standalone
Properties, user notifications, or other tool managers not showing up in Integrated version of AutoCAD
Reusing Pump Definitions (Import / Export)
Reversing orientation of Pipes and Conduits in Bulk
Saving a hydraulic model when using the AutoCAD platform (i.e. integrated)
Important License Update for OpenFlows Users
Setting the invert elevation for multiple conduits coming into one manhole
Simple Controls vs. Logical Controls
Sorting and relabeling a flextable based on upstream-downstream order
Source of the default Specific Speed for pumps and turbines
Step by step procedure for finding the curb length needed to capture 100% of gutter flow in a curb inlet with a continuously depressed gutter with no clogging
System.Reflection.TargetInvocationException crash when trying to open the application
Test Wiki Page - A1
Text, cells/blocks and line styles do not display correctly in a DXF background layer
The flow annotation (label) in my WaterGEMS for ArcMap isn't reflecting the value displayed in my Geotable or Flextable
The total area in the CN/Area Collection does not equal the total catchment area
Time tolerance setting in SCADAConnect Simulator
Troubleshooting ArcMap / ArcGIS Integration
Understanding Flow (Additional Subsurface) and Flow (Additional Carryover)
Upcoming training and release dates for OpenFlows products
User notification "Downstream TW out of range..."
User notification "Pump exceeds the maximum operating point specified for the pump curve"
User Notification - The captured surface flow at this node does not connect a valid subsurface network. The flow is lost from the system.
User Notification: "There is an error in the data for this pipe. The associated data is incorrect"
User Notification: Cross section maximum elevation is above the maximum headwater elevation
User Notifications: "Pump On elevation is not in the range of upstream ...." and "Off elevation of pump is lower than ..."
Using batch pipe split to fix nodes that overlay a pipe instead of connecting to it
Using PondMaker with different tailwater for each return event
Valve "Status (Initial)" Definitions
Velocity Calculations and the Average Velocity Methods in SewerCAD and StormCAD
Viewing graph data for multiple scenarios
Water age results in a pipe are different from the age in the downstream junction
Water Loss Management
Water quality Analysis during transient events
What are the limitations of importing/exporting EPANET files?
What is the dotted line that is associated with the isolation valves? Can I turn them off?
What's new in WaterCAD, WaterGEMS and HAMMER V8i SELECTseries 6 with CONNECT Integration?
What's New in WaterOPS CONNECT Edition 2.3 (Build 10.02.03.06)
When the user changes the fluid, why doesn't the calculated pump head change?
Working From Home With Your OpenFlows Software
"An error occurred when trying to calibrate the model"
"COM Error Not Documented" when opening OpenFlows product
"Default license feature configuration not found. Product features may be limited. Please run the License Administrator."
"The Depth-Flow, Depth-Flow (Simulated Variable Speed) and Volume-Flow pump definition types are unsupported"
"Unable to assign attribute ... for element because enumeration value ... is not valid."
Add custom data to profile with User Data Extensions
After computing the model, the pump efficiency results are listed as N/A
After running loadbuilder I get a message that says "The layer <Layer_Name> could not be opened."
At what point does OpenFlows product license usage start when integrated with MicroStation?
Background image quality poor on some computers or Crash when opening models with background layers
Blocky stepwise pattern is displayed instead of a continous smooth pattern that was entered when using the SWMM engine
Catch basins imported as manholes from LandXML
Change in results before turbine load rejection occurs
Custom quadrant curve not being recognized
Date-time based query not working
Default license configuration not retaining setting
Do inactive elements count against the license count?
Does HAMMER support initially negative pressures?
Does the friction method affect local minor loss in pipes?
Does WaterGEMS and WaterCAD report pressures as gauge pressure or absolute pressure?
Efficiency Curve vs. Wire-to-Water Efficiency Curve
Error message when validating model: "Elevation (Relative) values within the Irregular shape definition must be non-negative."
Error Saving: "Custom results path is invalid"
Find if pump operates off of the pump curve during an automated fire flow scenario
Flow arrows are not included in an exported DGN file when using the Save Symbology option in the MicroStation platform
Flow from pump is delayed after pump startup
GeoPak - StormCAD errors - GEOPAK runtime environment not found / Error writing GEOPAK/PowerCivil node
HEC-22 2nd edition energy loss calculations with the Implicit solver
How are "pipe sets" and "nodes of interest" used in a flushing analysis to get auxiliary results at other elements?
How can I see the amount of inflow or outflow occuring for a particular surge tank during the transient simulation in HAMMER?
How do I filter a column in my flextable using a custom query that retrieves all records with a <None> attribute?
How do I know if and when my pond is overtopping and how to quantify it?
How do I save my model files when working in the ArcMap or ArcGIS Pro platform?
How do the channel slopes and velocity effect the headloss formulas in SewerCAD and StormCAD?
How does StormCAD handle gutter flow from an active catch basin to an inactive catch basin?
How does the diameter of an isolation valve effect the calculated results?
How to add comments on custom pump and turbine quadrant curves
How to find volume of water coming from a trace element?
Hydropneumatic tank atmospheric pressure not changing results
Hydropneumatic tank profile animation and time history shows zero gas volume
Initial surge when using turbine load acceptance operating case
Initial turbine HGL the same as the final HGL after load acceptance
Is it possible to create old PondPack style text reports?
Is it possible to have a storm event start at a different time than the model simulation?
Is it possible to use point cloud information to populate elevations in Terrain Extractor (TRex)?
Is there a recommended level of Skelebration for different modeling conditions?
Junctions are created on top of one another after using ModelBuilder with the GIS-ID property
License usage in the ArcMap and ArcGIS Pro platform
LoadBuilder applying demands or loads to inactive elements
LoadBuilder importing zero flow loads
Long time to load background layers
Manage Pump Speed Series
Manage Pump Time Series
Managing large number of scenarios
Missing Young's Modulus and Poisson's Ratio values in the material library
Modeling Arch section shapes in SewerGEMS
Modeling closed or pressurized pipes in PondPack
Modeling treatment for pollutants at nodes or ponds in SewerGEMS and CivilStorm
MrSid files are not available as a background layer type or an error is generated when loading MrSid files
New User Learning Resource Guide for WaterSight
Pipe Renewal Planner Vs OpenFlows WaterCAP
Pipes connecting to the wrong element after submodel import
Pipes not merging when using Skelebrator with series pipe merging
PondPack error: Unable to open user roster
Problems opening GEOPAK Drainage file exported from StormCAD
Query, alert or formula UDX not working correctly with "=" (equals)
SCADAConnect in SewerGEMS
SCADAConnect Simulator in WaterCAD and WaterGEMS V8i SELECTseries 5
Series Pipe Merging in Skelebrator not working for pipes with zero diameter
Small difference in gutter worksheet result between US and SI units
The concentration at the stop node directly after a constituent source in a tank is decreasing rapidly
The control symbol, check valve symbol, and dashed lines connecting customer meters, isolation valves, and SCADA elements are not visible in the ArcMap or ArcGIS Pro platforms
The headloss in a pipe downstream of a parallel VSP is higher than expected
The result field "Depth (Flooding)" is listed as N/A after computing a model with the SWMM engine. Is there a way to see the depth of flooding for a node?
Translated version still showing as English
Troubleshooting making a SCADA connection to Oracle database
Troubleshooting ModelBuilder issues and errors connecting to an Oracle database
User Data Extension not appearing in the Post-Calculation Processor's "Output Property" field
User Data Extensions in the Fireflow report
User Notification "More than one VSPB cannot control the same control node"
User notification when computing: IDF data is not supported by SWMM. Storm event is excluded from export.
User notification: "Conduit has a Stop control structure, but this is not supported next to the connected outfall element."
Using US Survey feet
Warning about outlet hydrograph not cresting
WaterGEMS and WaterCAD Data Import FAQ
WaterSight - Pump Overview
What can I do to speed it up a file I need to extract elevations from is taking a long time to process in TRex?
What does Entrance Control mean?
What is the best way to model an orifice plate inside a catchbasin with surface storage above the catchbasin rim?
What is the difference between a stand pipe and an inlet box?
What is the purpose the Rainfall File, Runoff File, and RDII File in the Calculations Options?
What kind of demands should be used as the initial conditions of a transient simulation?
When running a query, why is it not picking up the elements that it should?
Why are there 2 entries for the same alternative in the dropdown menu in the properties of a scenario? One with an "i" and one without it.
Why are there so many extra element types listed for WaterGEMS and WaterCAD, such as surge tank, rupture disk, Periodic head-flow?
Why does the precipitation(cumulative) field for catchments show N/A at the 24 hour time step after computing ?
Will SCADA Results Publishing work with only OPC sources?
Is it possible to model a fixed flow VSP where the flow changes over time?
Tue, Jan 11 2022 1:14 PM
Fri, Jan 15 2021 2:42 PM
Wed, Sep 20 2017 9:17 AM
Fri, Jul 21 2017 3:35 PM
View current version
Secure File Upload
Support and Services
Subscription Services Portal
Training and Learning
About Bentley Institute
My Learning History
© 2021 Bentley Systems, Incorporated