You are currently reviewing an older revision of this page.
When opening a model saved in an older version with results files, if the model uses the Explicit (SWMM) solver, the following error can occur. This may happen when attempting to look at element properties, flextables, graphs, etc. For example clicking on a catchment.
System.NotSupportedException: Specified method is not supported.
at Haestad.CivilStorm.Calculations.SWMM5.Domain.SwmmNetworkMapReaderWriter.CheckHeader(BinaryReader br) at Haestad.CivilStorm.Calculations.SWMM5.Domain.SwmmNetworkMapReaderWriter.ReadMapFile(String mapFileName, IDictionary& nodeMap, IDictionary& linkMap, IDictionary& catchmentMap, IDictionary& elementCodes) at Haestad.CivilStorm.Calculations.SWMM5.Domain.SWMMResultDataConnection.LoadMapFile(Int32 scenarioId) at Haestad.CivilStorm.Calculations.SWMM5.Domain.SWMMResultDataConnection.IsMappedNode(Int32 elementId, Int32 scenarioID) at Haestad.CivilStorm.Calculations.SWMM5.Domain.SWMMFlowOutResultsRecordDataBroker.GetValuesOverTime(Int32 elementID, Int32 scenarioID, String fieldTypeName) at Haestad.Domain.ModelingObjects.ResultTimeVariantUnitizedFieldBase.GetValuesOverTimeImpl(Int32 elementID, Int32 scenarioID) at Haestad.StormSewerProduct.Adapting.Graphing.StormSewerProductResultGraphFieldDefinition.GetValuesImpl(IGraphSeriesModel graphSeriesModel) at Haestad.Framework.Adapting.UnitizedGraphFieldDefinitionBase.GetValues(IGraphSeriesModel graphSeriesModel)
This can happen when trying to read results from output files saved in an older version of the software.
Solutions:
1) Delete the output files and reopen the model. Alternatively, copy only the .STSW and .STSW.SQLITE files to a new folder on your local hard drive and reopen from there, then re-compute.
2) Apply the latest cumulative patch set for version 10.00.00.45 or 10.01.00.70. Or, when a newer version than 10.01.00.70 is available, upgrade. Reference # 774901 and 770100
Downloading Haestad / Hydraulics and Hydrology Software