You are currently reviewing an older revision of this page.
Why are some EPANET time-based controls are ignored when importing an INP file into WaterGEMS or WaterCAD?
This may be related to the format of the EPANET controls. If the controls in EPANET do not following expected format, the controls will be considered and ignored when they are imported. EPANET expects the format for time-based controls are expected to be in one of two formats. The controls can be on a 12-hour time format that includes AM or PM or on a 24-hour time format where AM or PM are not used. The controls will look like the examples below.
12-hour time format:
RULE 687IF SYSTEM CLOCKTIME > 02:00 PM THEN PUMP PMP-2 STATUS IS CLOSED
24-hour time format:
RULE 687IF SYSTEM CLOCKTIME > 14:00 THEN PUMP PMP-2 STATUS IS CLOSED
The times above are the same time, and either format is valid. However, if you include and AM/PM designation on a 24-hour time format (i.e., "14:00 PM"), this will be considered invalid and ignored when you import the controls into WaterGEMS or WaterCAD.
What are the limitations of importing/exporting EPANET files?
Creating Controls - Conditions, Actions, and Control Sets (CONNECT Edition and V8i SELECTseries 6)
Using SWMM Control Sets in SewerGEMS and CivilStorm