You are currently reviewing an older revision of this page.
Bentley OpenFlows FLOOD uses numerical models to simulate a range of hydraulic and hydrological processes that occur in river basins, including rainfall, infiltration, surface runoff, channel flow, and groundwater flow in a visually rich environment.
In urban areas Bentley OpenFlows FLOOD can connect to a SewerGEMS or CivilStorm stormwater network to dynamically simulate stormwater flow and surface runoff in a 2D environment.
Bentley OpenFlows FLOOD is also integrated with ContextCapture and LumenRT, allowing the ingestion of the topographic data obtained in ContextCapture as an input to the surface runoff model, and then to visualize model outputs in an immersive and visually striking 3D reality modeling interface as provided by LumenRT.
• Simulate floods and understand flood inundation and risk• Create and analyze hydraulic and hydrological models• Simulate river flows• Simulate surface runoff• Simulate floods in urban areas• Coastal flooding, risk and protection measures• Can be used to configure Flood Early Warning Systems (FEWS)
Downloading / Installation
For information on downloading and installing this product refer the link given below:Downloading OpenFlows | Hydraulics and Hydrology Software
Integrating SewerGEMS or CivilStorm with Bentley OpenFlows FLOOD for 2D simulations
2D Modeling of Urban Flooding
Sales Contact Request
Bentley OpenFlows FLOOD is Bentley’s evolution of MOHID Studio focused on flooding. MOHID Studio was developed by Action Modulers and was recently acquired by Bentley Systems. Click here for the press release. In the next weeks and months, new and updated documentation will be included here.