You are currently reviewing an older revision of this page.
This page displays a color coded status of all configured sensors on a map.
The color coding is based on the percentage of arrived signal readings compared to the expected number of readings in a given period.
Limits the display of sensors to the selected type of measurement that has been configured under Sensor Configuration, under Administration.
The period evaluated to determine the sensor status in Time Range drop down.
Reports the number of sensors falling in one of the categories for the observation period reported as "from" and "to" (defined based on the Time Range selected).
Note: when limiting the measurement to a specific sensor type, the display changes to <count for measurement> of <count across measurements> (e.g. 7 out of 10 sensors).
When clicking a sensor on the map, details are displayed here and a sensor chart with sensor reading for the previous 24 hours is shown below the map.
The friendly/descriptive name configured for the sensor
The SCADA signal tag name associated with the sensor.
The timestamp of the latest signal reading.
The sensor value of the latest signal reading.
Allows to turn on/off various information in the map.
Background Map that is available when the underlying i-model is geo-located (otherwise disabled)
The dropdown allows to select one of the styles: "Aerial", "Hybrid" or "Street"
Note: a double-click inside the plot-area of the sensor chart navigates to the Sensor Detail