You are currently reviewing an older revision of this page.
This page displays a color coded status of all configured sensors on a map.
The color coding is based on the percentage of arrived signal readings compared to the expected number of readings in a given period.
Reports the number of sensors falling in one of the categories for the observation period reported as "from" and "to" (defined based on the Time Range selected).
Note: when limiting the measurement to a specific sensor type, the display changes to <count for measurement> of <count across measurements> (e.g. 7 out of 10 sensors).
When clicking a sensor on the map, details are displayed here and a sensor chart with sensor reading for the previous 24 hours is shown below the map.
The friendly/descriptive name configured for the sensor
The SCADA signal tag name associated with the sensor.
The timestamp of the latest signal reading.
The sensor value of the latest signal reading.
Allows to restrict the displayed sensors to the text fragment entered into the search field.
Is used to control the way the sensor list is displayed.
The sensor measurement is configured under Sensor Configuration, under Administration.
displays a dropdown that defines the period the sensor status is evaluated for.
Use the map controls to control the visibilty of background map and pip skeleton.
Background Map that is available when the underlying i-model is geo-located (otherwise disabled)
The dropdown allows to select one of the styles: "Aerial", "Hybrid" or "Street"