You are currently reviewing an older revision of this page.
Select how to display the Sensors
This page displays a color coded status of all configured sensors on a map.
The color coding is based on the percentage of arrived signal readings compared to the expected number of readings in a given period.
Reports the number of sensors falling in one of the categories for the observation period reported as "from" and "to" (defined based on the Time Range selected).
Note: when limiting the measurement to a specific sensor type, the display changes to <count for measurement> of <count across measurements> (e.g. 7 out of 10 sensors).
When clicking a sensor on the map or selecting a sensor from the list located on the right side menu, a sensor chart with sensor reading for the previous 24 hours is shown below the map together with more information on the right side menu:
ID: The SCADA signal tag name associated with the sensor.
Value: The sensor value of the latest signal reading.
Latest: The timestamp of the latest signal reading.
By clicking in Open Details the user will be redirected to the sensor details page.
Clicking in the icon located on the right side menu to search for a specific sensor. Restricts the displayed sensors to the text fragment entered into the search field.
Clicking in icon located on the right side menu to filter sensors. It is used to control the way the sensor list is displayed.
Measurement: The sensor measurement is configured under Sensor Configuration, under Administration.
Tag: see the sensors displayed by user defined groups. User defined groups or Tags are defined in the Sensor Configuration, under Administration.
Use the map controls to control the visibility of pipes and to define the assessment period.
Define the period which sensor status are evaluated. By default sensor status are evaluated considering last 24 hour period, but user can choose to assess sensor status in the last 3 hours or in the last 7 days.