WaterSight - Sensor Report

Product(s): WaterSight
Version(s): 10.00.
Area: Documentation

Sensor report gives the operator quick access to all monthly input volumes in the system for each sensor and daily minimum values achieved in each month for each sensor

Volume tab

Integration along time of the flow time series data for the specific month to produce the cumulative volume. WaterSight uses advanced analytics and machine learning techniques to remove outliers and bad data. The volume is computed taking into consideration the following:

  • i) for failures with a gap smaller than 3 hours, missing values are obtained by linear interpolation of the flow time series;
  • ii) for failures with a gap bigger than 3 hours, WaterSight estimates the missing data by taking into consideration the pattern calculated for each sensor.
  • iii) Monthly volume is only calculated if there is at least 75% of the time flow data available for that specific month. If data available is less than 75% for that specific month, WaterSight will not compute the monthly volume and a value of zero will be displayed. 

Daily Minimum tab

The "Daily Minimum" tab reports minimum monthly values for flow, Pressure and Level depending on the selected measurement and for the time period selected, based on the 15 minutes time step series. 

Measurement

The measurement type of sensors to report on. Available options are Flow, Pressure and Level.

This control in enabled for the "Daily Minimum" tab only as the volume only flow specific. 

Report

The period the report is created for. The user can choose between last month, last 3 months, last 12 months, last 24 months, year to date or prior (calendar) year.

CSV Export

Exports the report to a csv file for further processing data e.g. with a spreadsheet software.

Recommended
Related