You are currently reviewing an older revision of this page.
Administration page to upload customer meters characteristics. This information is uploaded trough an excel file, which template is available for download in the Digital Twin Setup page, under Download Templates (Configuration file). The excel tab that must be completed is the one called "Customer Meters", shown in the figure below.
Figure 1 - Template Excel file containing the customer meter information that can be imported to WaterSight.
Meters information should come (at least customer meters ID and geolocation), whenever possible, from the commercial system, to assure that the most up to date information is imported into WaterSight. Information about billings (Customers Billing, inside the administration menu) together with meters geolocation (coordinates or zone) is used to compute the revenue of each zone, used in the water balance diagram. Customer meters fields such as Name, Address, Customer type, Is Critical are also used in the Operational events runs.
Note: Minimum required fields are marked with an asterisk.
Customer meter ID. Must be unique for each meter and must match the ID provided in the monthly billing files. This ID should also match the Billing ID field in the uploaded WaterGEMS hydraulic model, in case customer meter elements exist.
Diameter of each customer meter
Longitude where the customer meter is installed.
Only required if coordinates field is not defined. Zone that each customer meter belongs to. The zone name should be the same used in the zones polygon shapefile uploaded in the administration menu, in the GIS page.
...