Bentley Communities
Bentley Communities
  • Site
  • User
  • Site
  • Search
  • User
OpenFlows | Water Infrastructure
  • Product Communities
OpenFlows | Water Infrastructure
OpenFlows | Water Infrastructure Wiki What's New in WaterGEMS, WaterCAD, and WaterOPS CONNECT Edition Update 3.2 (10.03.02.75)
    • Sign In
    • OpenFlows | Water infrastructure Wiki
    • +OpenFlows CivilStorm
    • +OpenFlows CulvertMaster
    • +OpenFlows FLOOD
    • +OpenFlows FlowMaster
    • +OpenFlows HAMMER
    • +OpenFlows PondPack
    • +OpenFlows SewerCAD
    • +OpenFlows SewerGEMS
    • +OpenFlows StormCAD
    • +OpenFlows WaterCAD
    • +OpenFlows WaterGEMS
    • +OpenFlows WaterSight
    • +OpenFlows WaterOPS
    • +OpenFlows SewerOPS
    • +Bentley HEC-PACK
    • +General
    • +Help and Documentation
    • +Installation
    • +Licensing / Activation
    • +Integration
    • +Modeling
    • +Layout and Data Input
    • +Calculations
    • +Output and Reporting
    • +Other
    • -OpenFlows Product TechNotes And FAQs
      • +CivilStorm TechNotes and FAQs
      • Combining models with Submodel Import
      • Error publishing to i-model
      • For a modified basket handle shape conduit why is Area (Full Flow) equal to zero after computing?
      • +Hammer TechNotes and FAQs
      • Importing an AutoCAD or MicroStation CAD file using ModelBuilder
      • Learning Resource Guide for new users of HAMMER
      • Platform Compatibility
      • +PondPack TechNotes and FAQs
      • Scenario and Alternative Management
      • +SewerCAD TechNotes and FAQs
      • +SewerGEMS TechNotes and FAQs
      • Silent installation for Bentley OpenFlows Products
      • +StormCAD TechNotes and FAQs
      • Understanding the Modified Rational Method
      • Using Fit To Page Printing In The Standalone Platform
      • -WaterGEMS and WaterCAD TechNotes and FAQs
        • (Legacy Archive) Setting Up Fire Flow Analysis In WaterCAD And WaterGEMS version 7
        • Active Topology Management
        • Creating Formula-Based User Data Extensions
        • Engine Compatibility Mode and related Calculation options
        • How do I match the results I am getting from Darwin Calibrator in my model?
        • How is the “max” operator used with formula-derived user data extensions?
        • How to Import a OpenUtilities Designer Model
        • Importing Demand and Loading Patterns using ModelBuilder
        • Importing Demands From A Spreadsheet
        • Importing Time Series Data Using ModelBuilder [TN]
        • Modeling Air Valves At High Points in WaterCAD or WaterGEMS
        • Overview of WaterGEMS and SewerGEMS for ArcGIS Pro
        • Performing Leakage Detection Using Darwin Calibrator
        • ProjectWise Integration
        • Running a Criticality Analysis
        • Running Pipe Break Analysis
        • SCADAConnect using Citect Server as data source
        • Setting Boolean (True/False) Fields using ModelBuilder
        • Setting Up An Automated Fire Flow Analysis In WaterCAD 7.0 Or WaterGEMS 3.0 [TN]
        • Understanding Automated Fire Flow Results
        • Updating Pump Definitions using ModelBuilder
        • Using Darwin Calibrator
        • Using Darwin Designer to design pipes in WaterGEMS
        • Using Darwin Scheduler to Optimize Pump Operation
        • Using ModelBuilder to Import External Data
        • Using Network Navigator
        • Using Pipe Renewal Planner
        • Using Pressure Dependent Demands
        • Using the SCADA Element for annotation and reporting
        • Using the Scenario Energy Cost and Energy Management tools in WaterGEMS and WaterCAD
        • Using the Sync Out function to update source files using ModelBuilder
        • WaterGEMS and WaterCAD Automated Fire Flow FAQ
        • WaterGEMS and WaterCAD General FAQs
        • WaterGEMS for ArcGIS Pro and WaterGEMS for ArcMap FAQs
        • What is an i-model and why does it show as a prerequisite? How do I publish an i-model?
        • What's new in WaterCAD and WaterGEMS V8i SELECTseries 2?
        • What's new in WaterCAD and WaterGEMS V8i SELECTSeries 3?
        • What's new in WaterCAD and WaterGEMS V8i SELECTSeries 4?
        • What's new in WaterCAD and WaterGEMS V8i SELECTSeries 5?
        • What's new in WaterCAD and WaterGEMS V8i SELECTseries 6?
        • What's new in WaterGEMS and WaterCAD CONNECT Edition Update 2.3 – Build 10.02.03.06
        • What's new in WaterGEMS, WaterCAD, and HAMMER CONNECT Edition Update 1 (Build 10.01.01.04)
        • What's New in WaterGEMS, WaterCAD, and WaterOPS CONNECT Edition Update 3 (build 10.03.00.69)
        • -What's New in WaterGEMS, WaterCAD, and WaterOPS CONNECT Edition Update 3 - Build 10.03.01.08
          • What's New in WaterGEMS, WaterCAD, and WaterOPS CONNECT Edition Update 3.2 (10.03.02.75)
        • What's New in WaterGEMS, WaterCAD, and WaterOPS CONNECT Edition Update 3.3 (version 10.03.03.72)
      • What's New in SewerGEMS V8i SELECTseries 5?
      • What's new in SewerGEMS, SewerCAD, StormCAD and CivilStorm CONNECT Edition Update 1 (Build 10.01.01.04)
      • What's New with HAMMER CONNECT Edition
      • What's New with WaterGEMS and WaterCAD CONNECT Edition
    • Check boxes do not appear in tables such as Control Sets dialog
    • Consuming ContextCapture production files within your hydraulic model
    • Convergence NOT achieved Message when computing StormCAD or SewerCAD model
    • Converting Junctions or Hydrants to Isolation Valves
    • Displaying Shapefile Labels (Text) As a Background
    • Enhancing OpenFlows multi-user workflows with ProjectWise Share
    • Error "System.TypeInitializationException"
    • Error 32768 when opening model while integrated with ProjectWise
    • Errors installing patch set
    • Error when opening PondPack: "Object reference not set to an instance of an object" or "Application has generated an exception that could not be handled."
    • Error when saving or validating: System.AccessViolationException: Attempted to read or write protected memory.
    • File Open Dialog does not appear
    • Flextable Report of Multiple Element Types
    • Get to know OpenFlows CONNECT Edition
    • Get to know WaterGEMS, WaterCAD and HAMMER CONNECT Edition
    • How do I import/export multiple point pump curve pump definitions into a model using ModelBuilder?
    • How do you save backup files, so they save at different times and multiple levels?
    • How does the intermediate geodatabase (.MDB or .GDB) file function with ArcMap and ArcGIS Pro integration?
    • How to Delete Engineering Libraries if you get a message about a Read-only database
    • How to receive alerts on new version availability?
    • How to register DAO360.dll or a dll file?
    • How to search using wild cards on a sqlite type of database
    • How to See Hebrew or Arabic text in a .DXF file that was exported from WaterGEMS/WaterCAD
    • Hydraulic grade discontinuity at steep pipes or across nodes (frontwater analysis)
    • I get a red user notification that says, "Inlet guttter mannings n should be greater than 0".
    • Importing .HLB library files from old product versions into format used in the V8 product versions
    • Importing External Data in Geographic Coordinate Systems
    • Importing storm data and other library information from older versions
    • Changing element symbols in the AutoCAD platform
    • Interchange
    • Locating OpenFlows product error log file
    • Locating OpenFlows Product Version Number and License Information
    • Model backward / forward compatibility
    • Multi-user Workflows
    • Modeling a closed loop system
    • Modeling a flow split (diversion) with the SewerCAD or StormCAD numerical solver
    • Modeling turbine load acceptance plus load rejection
    • Multiple CN numbers for a catchment and multiple catchments with a single outlet node
    • Network Navigator Trace Upstream/Downstream does not return any elements
    • OpenFlows software numerical solver theory
    • Percent Connected Impervious Areas and Percent Unconnected Impervious Areas
    • Performing a hydrosanitary design in WaterGEMS or WaterCAD
    • PondPack user notification: "The composite outlet structure is either not selected or deleted."
    • Pressure pipe vs. conduit between pump and wetwell
    • Print Preview > Fit to Page shows blank page or Reports will not print
    • Properties not working when using MicroStation integration with ProjectWise
    • Properties, Flextables, user notifications, or other dialog is missing or will not open or appears to freeze the program in standalone
    • Properties, user notifications, or other tool managers not showing up in Integrated version of AutoCAD
    • Reusing Pump Definitions (Import / Export)
    • Reversing orientation of Pipes and Conduits in Bulk
    • Saving a hydraulic model when using the AutoCAD platform (i.e. integrated)
    • Important License Update for OpenFlows Users
    • Setting the invert elevation for multiple conduits coming into one manhole
    • Simple Controls vs. Logical Controls
    • Sorting and relabeling a flextable based on upstream-downstream order
    • Source of the default Specific Speed for pumps and turbines
    • Procedure for finding the curb length needed to capture 100% of gutter flow in a curb inlet with a continuously depressed gutter with no clogging
    • System.Reflection.TargetInvocationException crash when trying to open the application
    • Test Wiki Page - A1
    • Text, cells/blocks and line styles do not display correctly in a DXF background layer
    • The flow annotation (label) in my WaterGEMS for ArcMap isn't reflecting the value displayed in my Geotable or Flextable
    • The total area in the CN/Area Collection does not equal the total catchment area
    • Time tolerance setting in SCADAConnect Simulator
    • Troubleshooting ArcMap Integration
    • Turbine Efficiency
    • Understanding Flow (Additional Subsurface) and Flow (Additional Carryover)
    • Upcoming training and release dates for OpenFlows products
    • User notification "Downstream TW out of range..."
    • User notification "Pump exceeds the maximum operating point specified for the pump curve"
    • User Notification - The captured surface flow at this node does not connect a valid subsurface network. The flow is lost from the system.
    • User Notification: "There is an error in the data for this pipe. The associated data is incorrect"
    • User Notification: Cross section maximum elevation is above the maximum headwater elevation
    • User Notifications: "Pump On elevation is not in the range of upstream ...." and "Off elevation of pump is lower than ..."
    • Using batch pipe split to fix nodes that overlay a pipe instead of connecting to it
    • Using PondMaker with different tailwater for each return event
    • Valve "Status (Initial)" Definitions
    • Velocity Calculations and the Average Velocity Methods in SewerCAD and StormCAD
    • Viewing graph data for multiple scenarios
    • Water age results in a pipe are different from the age in the downstream junction
    • Water Loss Management
    • Water quality Analysis during transient events
    • WaterGems Tips
    • What are the limitations of importing/exporting EPANET files?
    • What is the dotted line that is associated with the isolation valves? Can I turn them off?
    • What's new in WaterCAD, WaterGEMS and HAMMER V8i SELECTseries 6 with CONNECT Integration?
    • What's New in WaterOPS CONNECT Edition 2.3 (Build 10.02.03.06)
    • When the user changes the fluid, why doesn't the calculated pump head change?
    • Working From Home With Your OpenFlows Software
    • "An error occurred when trying to calibrate the model"
    • "COM Error Not Documented" when opening OpenFlows product
    • "Default license feature configuration not found. Product features may be limited. Please run the License Administrator."
    • "The Depth-Flow, Depth-Flow (Simulated Variable Speed) and Volume-Flow pump definition types are unsupported"
    • "Unable to assign attribute ... for element because enumeration value ... is not valid."
    • Add custom data to profile with User Data Extensions
    • After computing a model with the SWMM solver, what does the following warning mean: "Maximum depth increased for node CB-XX"?
    • After computing the model, the pump efficiency results are listed as N/A
    • After running loadbuilder I get a message that says "The layer <Layer_Name> could not be opened."
    • Arch section shape modeling limitations
    • At what point does OpenFlows product license usage start when integrated with MicroStation?
    • Background image quality poor on some computers or Crash when opening models with background layers
    • Blocky stepwise pattern is displayed instead of a continous smooth pattern that was entered when using the SWMM engine
    • Calculating ellipse coefficients in CulvertMaster
    • Calculation of Side Flow factor with grate width less than gutter width
    • Can User Data Extensions be shared between elements in a model?
    • Catch basins imported as manholes from LandXML
    • Change in results before turbine load rejection occurs
    • Conduit "Size" attribute does not appear correctly in annotations or reports
    • Custom quadrant curve not being recognized
    • Date-time based query not working
    • Default license configuration not retaining setting
    • Do inactive elements count against the license count?
    • Does HAMMER support initially negative pressures?
    • Does the friction method affect local minor loss in pipes?
    • Does WaterGEMS and WaterCAD report pressures as gauge pressure or absolute pressure?
    • Efficiency Curve vs. Wire-to-Water Efficiency Curve
    • Error importing a LandXML file from StormCAD into Civil 3D "A pipe or conduit had an unsupported geometry"
    • Error message when validating model: "Elevation (Relative) values within the Irregular shape definition must be non-negative."
    • Error message: "Unrecognized database format ..." when trying to open model
    • Error Saving: "Custom results path is invalid"
    • Find if pump operates off of the pump curve during an automated fire flow scenario
    • Flow arrows are not included in an exported DGN file when using the Save Symbology option in the MicroStation platform
    • Flow from pump is delayed after pump startup
    • HAMMER error: "Zero initial head from pump (turbine). Change at least one of the heads at the pump ends of the adjacent pipes."
    • HEC-22 2nd edition energy loss calculations with the Implicit solver
    • How are "pipe sets" and "nodes of interest" used in a flushing analysis to get auxiliary results at other elements?
    • How can I see the amount of inflow or outflow occuring for a particular surge tank during the transient simulation in HAMMER?
    • How can I speed up computing a model that I need to extract elevations from - it is taking a long time to process in TRex?
    • How do I filter a column in my flextable using a custom query that retrieves all records with a <None> attribute?
    • How do I know if and when my pond is overtopping and how to quantify it?
    • How do I save my model files when working in the ArcMap or ArcGIS Pro platform?
    • How do the channel slopes and velocity effect the headloss formulas in SewerCAD and StormCAD?
    • How do you define the starting conditions of the transient simulation?
    • How does StormCAD handle gutter flow from an active catch basin to an inactive catch basin?
    • How does the diameter of an isolation valve effect the calculated results?
    • How to add comments on custom pump and turbine quadrant curves
    • How to find volume of water coming from a trace element?
    • How to open a .PRNX report file created on exporting custom report in OpenFlows product
    • Hydropneumatic tank atmospheric pressure not changing results
    • Hydropneumatic tank profile animation and time history shows zero gas volume
    • Initial surge when using turbine load acceptance operating case
    • Initial turbine HGL the same as the final HGL after load acceptance
    • Irregular Weir Flow Calculations in a Composite Outlet Structure
    • Is it possible to create old PondPack style text reports?
    • Is it possible to have a storm event start at a different time than the model simulation?
    • Is it possible to use point cloud information to populate elevations in Terrain Extractor (TRex)?
    • Is there a recommended level of Skelebration for different modeling conditions?
    • Is there a way to model a rectangular pipe in WaterCAD, WaterGEMS or HAMMER?
    • Junctions are created on top of one another after using ModelBuilder with the GIS-ID property
    • Learning Resource Guide for WaterSight
    • License usage in the ArcMap and ArcGIS Pro platform
    • LoadBuilder applying demands or loads to inactive elements
    • LoadBuilder importing zero flow loads
    • Log4net issues appear in security scans for OpenFlows products
    • Long time to load background layers
    • Manage Pump Speed Series
    • Manage Pump Time Series
    • Managing large number of scenarios
    • Missing Young's Modulus and Poisson's Ratio values in the material library
    • Modeling closed or pressurized pipes in PondPack
    • Modeling culverts in series in CulvertMaster
    • Modeling treatment for pollutants at nodes or ponds in SewerGEMS and CivilStorm
    • MrSid files are not available as a background layer type or an error is generated when loading MrSid files
    • My scenario label is not in my report preview when I run the report builder
    • +OpenFlows Academic Books
    • Pipe Renewal Planner Vs OpenFlows WaterCAP
    • Pipes connecting to the wrong element after submodel import
    • Pipes not merging when using Skelebrator with series pipe merging
    • PondPack error: Unable to open user roster
    • Problems opening GEOPAK Drainage file exported from StormCAD
    • Purpose of the Virtual Flow Depth Calculation Option
    • Query, alert or formula UDX not working correctly with "=" (equals)
    • Red user notification, "Post engine loading process encountering unexpected data. Please rectify any validation errors and try again."
    • Reporting pressure available at the exact total needed fire flow
    • SCADAConnect in SewerGEMS
    • Series Pipe Merging in Skelebrator not working for pipes with zero diameter
    • Sharing Queries for use in other models
    • Small difference in gutter worksheet result between US and SI units
    • The concentration at the stop node directly after a constituent source in a tank is decreasing rapidly
    • The control symbol, check valve symbol, and dashed lines connecting customer meters, isolation valves, and SCADA elements are not visible in the ArcMap or ArcGIS Pro platforms
    • The headloss in a pipe downstream of a parallel VSP is higher than expected
    • The result field "Depth (Flooding)" is listed as N/A after computing a model with the SWMM engine. Is there a way to see the depth of flooding for a node?
    • Translated version still showing as English
    • Troubleshooting ArcGIS Pro Integration
    • Troubleshooting making a SCADA connection to Oracle database
    • Troubleshooting ModelBuilder issues and errors connecting to an Oracle database
    • Unexpected small flow in pipes that should have zero flow
    • Use of the Gas Law Exponent During Initial Conditions vs. Transient simulation
    • User Data Extension not appearing in the Post-Calculation Processor's "Output Property" field
    • User Data Extensions in the Fireflow report
    • User Notification "More than one VSPB cannot control the same control node"
    • User notification when computing: IDF data is not supported by SWMM. Storm event is excluded from export.
    • User notification: "Conduit has a Stop control structure, but this is not supported next to the connected outfall element."
    • User notification: "Transition from CONCENTRATED to EXTENDED"
    • Using Imperial and Metric Hydro International Vortex Valves
    • Using US Survey feet
    • Warning about outlet hydrograph not cresting
    • WaterGEMS and WaterCAD Data Import FAQ
    • WaterSight - Pump Overview
    • +WaterSight Learning Resource Guide
    • Wetwell flooded warning in steady state with GVF Convex (SewerCAD) solver
    • What does Entrance Control mean?
    • What is the best way to model an orifice plate inside a catchbasin with surface storage above the catchbasin rim?
    • What is the difference between a stand pipe and an inlet box?
    • What is the purpose the Rainfall File, Runoff File, and RDII File in the Calculations Options?
    • What is the workflow for setting up pre and postdeveloped conditions for multiple return events?
    • What kind of demands should be used as the initial conditions of a transient simulation?
    • What's new in HAMMER V8i SELECTseries 6?
    • When running a query, why is it not picking up the elements that it should?
    • Why are there 2 entries for the same alternative in the dropdown menu in the properties of a scenario? One with an "i" and one without it.
    • Why are there so many extra element types listed for WaterGEMS and WaterCAD, such as surge tank, rupture disk, Periodic head-flow?
    • Why do I get a warning message about the rational method being used for the modified rational method?
    • Will SCADA Results Publishing work with only OPC sources?

    You are currently reviewing an older revision of this page.

    • History View current version

    What's New in WaterGEMS, WaterCAD, and WaterOPS CONNECT Edition Update 3.2 (10.03.02.xx)

    Product(s): WaterCAD, WaterGEMS, WaterOPS
    Version(s): 10.03.02.xx
    Area: Installation

    Overview

    CONNECT Edition Update 3 version 10.03.02.xx of WaterGEMS, WaterCAD, and WaterOPS introduces improvements and features to help you be more successful.

    Table of Contents

    • Integration with ArcGIS Pro (WaterGEMS only)
    • Updates to supported Operating Systems and Platforms
    • Model Compatibility
    • Stability enhancements and fixes to reported issues


    Integration with ArcGIS Pro

    WaterGEMS CONNECT Edition Update 3 (build 10.03.02.xx) will now integration with ArcGIS Pro. With WaterGEMS for ArcGIS Pro, you can utilize a WaterGEMS model while being able to take advantage of native ArcGIS Pro functionality. 

    To use ArcGIS Pro integrated version, you would open the shortcut for WaterGEMS for ArcGIS Pro. You will then be prompted to open a new or existing ArcGIS project flle (.APRX). If you select choose to open a new ArcGIS Pro project, the next step would be choose the map. Once you do this. a map view will open. 

    The ArcGIS Pro ribbon will include the WaterGEMS menus. You can add a new or existing WaterGEMS model file from the WaterGEMS tab and selecting Hydraulic Model, then choosing either "Add New Hydraulic Model" or "Add Existing Hydraulic Model." Similar to using WaterGEMS for ArcMap, you will then be prompted to add a personal geodatabase that will be associated with the model.

    Once you have added or created a hydraulic model to use in WaterGEMS for ArcGIS Pro, the workflow for adding and editing model elements and computing a model will be similar. Tools like ModelBuilder, LoadBuilder, and Terrain Extractor (among others) are all available, as with the Standalone version of WaterGEMS. You can also add elements manually from the "WaterGEMS (Layout)" tab in the ribbon interface. 

    To view color coding, display active topology, or display flow arrows, you would first move the WaterGEMS model data to the geotable using Join Geotables. Go to Join Geotables > Add Joins, which will update the geotable so that symbology can be added and updated. 

    Once completed, you can view the attribute table by right-clicking on an element type in the ArcGIS Pro Contents menu and choosing Attribute Table. In addition to GIS-related information, the attribute table will include element properties and results shown in the element FlexTable.

    To add color coding, you can go to the WaterGEMS menu in the ribbon and choose Join Geotables > Initialize Symbology (you will need to highlight an element type in the Contents manager) or right-click on the element type in the Contents manager and select Initialize Symbology. This will open the Layer Symbology dialog so that you can create or manage color coding. 

    With Add Joins completed, you will also be able to update the drawing as it relates to active topology and flow arrows. If there are inactive elements in the model, you can go to the WaterGEMS-View tab and select Apply Active Topology > Apply Active Topology. Similarly, if you want to display flow arrows, you can go to WaterGEMS-View, then select Apply Flow Arrows > Apply Flow Arrows. If you want to disable either of these, you can go to the WaterGEMS-View tab to do so.

    Compatible Platforms and Operating Systems

    Compatible Operating Systems

    • Windows 10 (32-bit or 64-bit)
    • Windows 8 (32-bit or 64-bit)
    • Windows 7 (32-bit or 64-bit)

    Supported Platforms:

    • Standalone (no CAD or GIS software required); Note that WaterOPS is a standalone-only application
    • MicroStation V8i SELECTseries 10 and earlier (CONNECT Edition Integration is not yet supported)
    • AutoCAD 2019, 2020, 2021
    • ArcMap 10.8 and earlier (WaterGEMS only)
    • ArcGIS Pro 2.6 (WaterGEMS only)

    See: Platform Compatibility

    Model Compatibility

    Models saved in older versions of WaterGEMS, WaterCAD, and WaterOPS can be opened in other 10.03.XX.XX releases.

    See also: Model backward / forward compatibility

    Stability enhancements and fixes to reported issues

    As with all new versions, this release of WaterGEMS, WaterCAD, and WaterOPS includes fixes to various user-reported issues from the previous release, providing an overall more stable experience.

    See Also [Top of Page]

    WaterGEMS and WaterCAD TechNotes and FAQs

    WaterOPS TechNotes and FAQs

    Downloading OpenFlows / Hydraulics and Hydrology Software

    Software installation order

    Cumulative patch set information

    Set up notifications for new versions and patch set releases

    Communities
    • Home
    • Getting Started
    • Community Central
    • Products
    • Support
    • Secure File Upload
    • Feedback
    Support and Services
    • Home
    • Product Support
    • Downloads
    • Subscription Services Portal
    Training and Learning
    • Home
    • About Bentley Institute
    • My Learning History
    • Reference Books
    Social Media
    •    LinkedIn
    •    Facebook
    •    Twitter
    •    YouTube
    •    RSS Feed
    •    Email

    © 2023 Bentley Systems, Incorporated  |  Contact Us  |  Privacy |  Terms of Use  |  Cookies