OpenFlows product menus missing from Ribbon interface for MicroStation CONNECT Edition integrated version

Product(s): SewerGEMS, StormCAD, SewerCAD, CivilStorm, WaterGEMS, WaterCAD, HAMMER
Version(s): CONNECT Edition Update 3 (10.03.04.xx or later)
Area: Installation
Environment MicroStation CONNECT Edition

Problem

When working in the MicroStation CONNECT Edition integrated version of the OpenFlows products, the OpenFlows product menus are missing from the Ribbon interface.

Solution

First, make sure that the WorkSpace is set to OpenFlows and the WorkSet is set to the OpenFlows product you are using. 

If it is, check that the Workflows list (the pulldown menu in the upper left) is set to the OpenFlows product.

Note: MicroStation remembers the last item selected in the Workflows list. If you opened regular MicroStation CONNECT Edition between working with the OpenFlows integrated version, you may need to select the OpenFlows product from the list.

If that doesn't help, close MicroStation and any OpenFlows product and try reintegrating the OpenFlows product and MicroStation by going to Start menu and select "Integration (product name) with AutoCAD, MicroStation..." You can also go to the Control Panel and select Programs and Features. From there, choose the OpenFlows product from the list and choose the option to Repair. 

See Also

Troubleshooting MicroStation integration

  • Created by Bentley Colleague
  • When: Thu, Aug 19 2021 4:02 PM
  • Last revision by Bentley Colleague
  • When: Fri, Sep 24 2021 2:15 PM
  • Revisions: 2
  • Comments: 0
Recommended
Related