Overview
There are a couple of options available to users to house manually imported data collected by manual readings or sensors not connected to the iTwin IoT cloud. This section of articles will review those options.
The Import Device allows users to emulate a number of sensor types available within iTwin IoT. These sensors include Load Cell, Position, Position (ENH), Temperature, Tilt Biaxial, and Vibrating Wire. Follow this link for instructions about setting up an Import Device.
The Multi-Purpose Import Device allows users to create a sensor or sensors and then select a data metric and metric unit that each sensor will store data for in iTwin IoT. Available metrics include Deposition, Depth, Depth to H2O, Distance 1D, Electrical Conductivity, Elevation, Elevation H2O, Force, Height, Δ Distance 1D, Oxidation-Reduction Potential, Precipitation, Pressure, pH, Humidity, Termperature, Tilt X, Tilt Y, Turbidity, Voltage, Volume, and Volumetric Flow Rate. Follow this link for instructions about setting up a Mulit-Purpose Import Device.