The following table contains frequently asked questions related to the "Bentley Map Mobile Publisher" releases:
Downloads of Bentley Map Mobile Publisher are available from the following location:
You must successfully "Sign In" to Bentley Map Mobile on the start-up screen shown below to see your data, otherwise only the sample data file will be visible.
Bentley Map Mobile is free to download but requires a Bentley CONNECT login for use.
Higher resolution raster can be generated during the Bentley Map Mobile Publisher process by setting the…
MS_RASTER_DOWNSAMPLING_PREFSIZE_FORIMODEL=5 (default value)
…configuration variable to a number such as 10, 20 or higher (maximum 4095) and then republishing the data set. Please note that increasing this value can create significantly larger i-models which will have a direct impact on the first time you attempt to open the file in Bentley Map Mobile, due to the increased data that must be initially uncompressed.
The expiry date can be defined for the Bentley Map Mobile Publisher process by setting either of the following configuration variables:
MAPMOBILEPUBLISHER_EXPIRY_DATE=3/31/2015 (defines explicit expiry date, default value "None")
MAPMOBILEPUBLISHER_EXPIRES_IN=28 (computes expiry date equal to today + 28 days)
Note: When both configuration variables are defined the explicit date value defined with MAPMOBILEPUBLISHER_EXPIRY_DATE takes precedence. When neither configuration variable is defined the published Bentley Map Mobile .imodel will have no expiry date.
Publishing of WMS references is not supported at this time.
Is it possible to publish WMS references also?
Are there any news on new release of Map Mobile Publisher that runs with Bentley Map Ss4 (in addition to Map Enterprise)?
This is not regular imodel as I have found out it uses "mobile imodel" format (sqlite) which is specific.
.imodels documents are designed to be used in a variety of Bentley Mobile apps. See: www.bentley.com/.../other+technology.htm
Is the .imodel specific to Bentley Map Mobile?